Pingxiang Qunxing Ceramic Roller Chemical Packing Factory Ceramic Roller

Description :

　　Roller shell: High strength * * * ceramic tube

　　***Sex: Neither acid nor alkali salts have a corrosive effect on it.

　　Strong hardness and durability: with a lifespan of over 10 years.

　　Non stick material: The ceramic surface forms an oxide film, which does not adhere to any substance and does not react with any substance.

　　Reduce belt wear: Due to the fact that ceramics become smoother under frictional forces, belt wear can be reduced, and there will be no situation where metal rollers fail and scratch the belt after wear, which can extend the service life of the belt.

　　Roller shaft: Made of cold drawn shaft material, the assembly part of the bearing is ground smooth. ***Mechanical processing ensures its concentricity, allowing the rollers to run smoothly.

　　Bearings: The * * * * bearings ensure the service life of the rollers and extend the replacement cycle of the rollers.

　　External sealing protective cover: The sealing cover adopts * * * design, which has dust removal and waterproof properties, and can greatly protect the bearing from dust and water damage, achieving the normal service life of the bearing

　　Overall performance:

　　1. The lifespan of the ceramic roller body is greater than 10 years;

　　2. Bearing life<3 years (bearings need to be replaced after about three years);

　　3. The bearing allows a temperature rise of less than 100 degrees;

　　4. Applicable bandwidth: 500-1400mm;

　　5. Specification and model: TD75 or TDII;

　　Mechanical properties:

　　Specific gravity: 2.3-3.5g/cm3;

　　Water absorption rate:<1%;

　　Compressive strength: 145Mpa;

　　Wear:<0.05%;

　　Hardness: ≥ Grade 7 (Mohs);

　　Chemical composition:

　　Al2O3+SiO ≥92%

　　MgO 0.4%

　　Fe2O3 0.25%

　　CaO 0.15%

　　Na2O 0.1%

AfterSalesService :

• Ceramic roller