Stainless steel Ball ring DN25 specification customized Pingxiang metal chemical filler manufacturer

Description :

　　 Metals produced by the companyBall RingSignificant improvements have been made to the Rasi ring by opening two rows of windows with internal tongue plates on the ring wall. This structure improves gas-liquid distribution and fully utilizes the inner surface of the ring. Compared with the Rasi ring, the processing capacity can be increased by more than 50% while the pressure is reduced by half. Ball ring is a three-dimensional filling material formed by opening ten rectangular small windows on the side wall of a metal ring, with the window blades of the window holes bent into the center of the ring, overlapping at the center of the ring, and the positions of the upper and lower windows interlocking with each other. Large effective specific surface area, no clumping, no clogging, long service life, and can also be reused, making production operation management simple.

　　2) Product Performance Introduction:

　　Metals produced by the companyBall RingFeatures: Ball ring packing has the characteristics of low pressure drop, high flux, and high efficiency. HYPAK packing has lower pressure drop and higher mass transfer efficiency compared to PALL rings of the same size, and the liquid distribution in the packing layer is better.

　　3) Product Technical Parameters:

　　4) Product application:

　　 Produced by the companyBall RingSuitable for use as contact packing in carbon dioxide degassing towers, ozone contact reaction towers, and other reaction towers

　　5) Product features:

　　Produced by the companyBall RingMain features:

　　1. High air velocity, multiple blades, low resistance

　　2. The specific surface area is large, which can fully solve the problem of gas-liquid exchange.

　　3. Bauer ring has the characteristics of high production capacity, low resistance, and high operational flexibility.

　　Ball ring packing has the advantages of high flux, low resistance, high separation efficiency, and high operational flexibility. Under the same pressure reduction, the processing capacity can be more than 50% larger than that of Rascal ring. At the same processing capacity, pressure reduction can be reduced by half, and mass transfer efficiency can be improved by about 20%. Compared with Raschig ring, this type of packing has the characteristics of high production capacity, strong resistance, and high operational flexibility. In general, it can be processed 50% -100% higher than Raschig ring under the same pressure drop, and 50% -70% lower than Raschig ring under the same pressure drop. The tower height can also be reduced. Using Ball ring can save 20% -40% of packing volume compared to Raschig ring.

AfterSalesService :

• Stainless steel ball ring