Pingxiang Qunxing manufacturers supply metal flower garlands and Taylor flower garland fillers

Description :

　　one）Product Description:

　　 Produced by the companyMetal flower wreath fillingThe main material is aluminum alloy, and the product is made by stamping aluminum alloy plates. The appearance is ellipsoidal filler, including an inner ring and an outer ring formed by a single plate. The inner ring and the outer ring are connected by ribs, and all ribs are composed of upper and lower semi-circular ribs. Every two adjacent ribs are arranged in a staggered manner by upper and lower semi-circular ribs. This has a larger specific surface area and lighter unit weight. In addition to the advantages of high flux, low blockage, high flux, low resistance, and reduced pressure, the product also has a high liquid holding capacity at the gaps of the packing, which can prolong the residence time of the liquid in the tower, thereby increasing the contact time between the gas-liquid phases and improving the mass transfer efficiency of the packing.

　　two）Product application:

　　 Produced by the companyMetal flower wreath fillingThe material density is 2.7g/cm3. Due to the dense oxide protective film on the surface, it is not easily corroded and can remain unchanged in media below 300 ℃. Aluminum alloy metal flower ring filling can be used as a filler for a long time and is often used to manufacture chemical reactors and fillers, medical equipment, refrigeration devices, oil and gas pipelines, etc.

　　three）Product Technical Parameters:

　　Metal flower wreath fillingThe geometric characteristic parameters are as follows:

　　metal wreathPackaging method: woven bag;

　　metal wreathTransportation method: truck transportation;

　　Material: 304/316/titanium, etc;

AfterSalesService :

• metal wreath