Real time quotation from Taiyuan Bridge Drain Pipe Dealer

Description :

　　Real time quotation from Taiyuan Bridge Drain Pipe Dealer

　　The drainage pipe is primarily responsible for the task of rainwater and highway drainage. It is an external steel pipe formed by adding other additives to high-density steel. According to different drainage requirements, the size of the pipe holes can be 10mm × 1mm-30mm × 3mm, and can be evenly distributed in the range of 360 degrees, 270 degrees, 180 degrees, 90 degrees, etc. It is widely used in drainage areas such as highways, railway subgrades, subway projects, waste landfills, tunnels, green belts, sports fields, and slope protection caused by high water content, as well as underground irrigation and drainage systems in agriculture and horticulture.

　　The main performance characteristics of drainage pipes are as follows:

　　1、 Drainage performance: The orifice is located in the valley, and due to the bidirectional interaction between the wave crest and the filtering fabric, the orifice is not easily blocked, ensuring the unobstructed flow of the permeable system.

　　2、 Corrosion resistance: Compared with soft spring drainage pipes, plastic is less prone to rusting.

　　3、 Economy type: Compared with other drainage pipes of the same diameter, its price is lower.

　　4、 The organic combination of strength and easy bending: The double corrugated structure effectively improves the external pressure strength of the drainage pipe, and the drainage system will not be affected by external pressure deformation, which will affect the drainage effect of the drainage pipe.

　　What is the principle of cast iron drainage pipe? The use of flat mouth connection for drainage pipes requires high quality of pipe materials, including high requirements for the ovality of the outer diameter, wall thickness, and physical properties of the rubber ring of the drainage pipe. The installation and construction of drainage pipes should be strictly carried out according to the operating procedures. Especially during the installation of straight pipes, each pipe interface needs to be fixed to the load-bearing wall of the building with a riser clamp; Horizontal pipes should be equipped with hangers at each interface.

　　5： The drainage pipes on highways or overpasses should not be directly hung under the slab. The drainage pipes can be directly led to the ground through longitudinal and vertical drainage pipes, or executed according to design requirements. The pipes should have good fixing devices, such as anchor rails and clamps. 6： This product is lightweight, low-priced, and easy to transport, install, maintain, and upkeep. Especially suitable for drainage facilities on both sides of railways, highways, airports, roads, and bridges. Drainage pipes have the advantages of high water supply pressure, resistance to external loads, and adaptability to changes in geological conditions. Drainage pipes have high strength, good toughness, corrosion resistance, easy installation of flexible interfaces, strong seismic resistance, and low labor intensity. They can be used in areas with poor geology and cross highways without the need for additional steel pipe processing. In addition, they have strong corrosion resistance and can be applied to coastal and saline alkali areas.

AfterSalesService :

• Taiyuan Bridge Drain Pipe