Crusher Yunnan Kunming manufacturer direct sales Hengxing beneficiation equipment

Description :

　　PFSeries of counterattack crushers

　　The PF series impact crusher is a new product carefully designed by our company based on the absorption of advanced technologies at home and abroad. This series of equipment can process materials with a particle size of no more than 500 millimeters and a compressive strength of no more than 320 megapascals (granite, limestone, concrete, etc.). The impact crusher is widely used in the production of high-grade highway, hydropower, artificial sand and gravel materials, crushing, construction and other industries for its excellent performance and good performance.

　　The ideal feed particle size for the PF series impact crusher is 100-500mm, which should not exceed the specified value. The user can adjust the gap between the hammer head, impact plate, and leveling component as needed to achieve the desired discharge particle size.

　　Working principle of counterattack:

　　The PF series products utilize impact energy to crush materials. During operation, the rotor of the impact crusher rotates at high speed under the drive of the electric motor. After the materials enter, they collide with the plate hammer on the rotor and are crushed again. Then they are counterattacked onto the lining plate and crushed again, and finally discharged from the discharge port. Users can adjust the gap between the counterattack frame and the rotor frame to achieve the goal of changing the particle size and shape of the material discharge.

　　Counterattack breaking performance characteristics:

　　1. Multi cavity uniform crushing, suitable for crushing hard rocks;

　　2. Low and large feed inlet, convenient for production line layout and increasing feed size;

　　3. New wear-resistant materials extend the service life of plate hammers, impact plates, and lining plates;

　　4. High chromium plate hammer and unique counterattack lining plate, especially suitable for hard rock crushing, efficient and energy-saving;

　　5. Hard rock fragmentation, high efficiency and energy saving;

　　6. The uniform board structure makes the discharge more small in particle size and cubic shape, without internal patterns;

　　7. The product is in the shape of a cube, and the particle size of the discharge can be adjusted;

　　8. Simplify the crushing process;

　　9. Fully hydraulic opening, convenient for maintenance and replacement of vulnerable parts.

　　PFStructural diagram of series impact crusher:

　　1. Rear box

　　2. Counterattack lining plate 3. Counterattack frame 4. Lining plate 5. Feed inlet 6. Base 7. Plate hammer 8. Rotor frame

　　PFMain technical parameters of the series of counterattack crushers:

AfterSalesService :

• crusher