Yunnan swing feeder manufacturer 400X400 600X600

Description :

Pendulum feeder product introduction

　　The swing feeding machine is suitable for small pieces of material, with a simple structure and good management, but it has poor accuracy, discontinuous feeding, difficult measurement, and severe wear and tear. It is commonly used in sintering plants as a fuel crushing chamber and installed under the ore tank. The purpose of configuring the swing type in the fuel crushing chamber of the sintering plant is mainly to improve the working conditions of the electromagnet. Because the material on the small adhesive tape under the fuel tank is easily compressed by the tank column, the working conditions of the electromagnetic iron absorber deteriorate. After adding the swing feeder, the feeding layer on the tape becomes looser, greatly improving the working effect of the electromagnet. Pendulum feeding machine is a mechanical equipment that achieves continuous and uniform feeding. It is installed below the storage tank or funnel to dry materials that are not easily clumped, such as ores, coal blocks, etc. But it is not suitable for conveying powdered materials, which can easily cause blockage and affect the feeding. At the same time, it can also cause powder to fly and affect the cleanliness of the workplace. When the machine is not working, it can also be used as a lock. Due to the use of a worm gear reducer, this machine has a compact structural size and is equipped with a reliable sealing device, which makes it difficult for dust and dirt to enter the interior and affect operation.

　　Pendulum feeder structure

　　The swing feeding machine is suitable for feeding fine-grained (generally below 50mm) ores and is widely used for discharging ores from grinding ore bins. Its structure is shown in the following figure.

　　Install a fan-shaped gate at the discharge port of the ore bin. The gate is decelerated by an electric motor through a worm gear, and swings in an arc through an eccentric shaft and a pull rod. When the gate moves forward, the discharge port is closed, and when the gate moves backward, the discharge port can be opened for unloading. Therefore, this type of ore feeder can intermittently and uniformly feed ore.

　　The swing feeding machine has a simple structure and easy management, but its accuracy is poor, the feeding is discontinuous, and the measurement is difficult. Its ore yield can be adjusted by the eccentricity of the eccentric wheel.

　　Technical Parameters Table of Pendulum Feeding Machine

　　Pendulum mining machine product display

AfterSalesService :

• Yunnan swing feeder manufacturer