Yunnan manufacturer direct sales SF copper ore flotation machine gold ore flotation machine flotation machine price

Description :

　　 SFType flotation machine

　　This series of flotation machines is suitable for the separation of non-ferrous and black metals, as well as for the separation of non metals such as coal fluorite and talc.

　　SFComposition of type flotation machine

　　The flotation machine is driven by the motor V-belt to drive the impeller to rotate, generating centrifugal action to form negative pressure. On the one hand, sufficient air is sucked in to mix with the pulp, on the other hand, the pulp is stirred to mix with drugs, and at the same time, the foam is refined, so that the minerals are bonded to the foam and floated to the pulp surface to form a mineralized foam. Adjust the height of the ram and control the liquid level so that the useful foam can be scraped out by the scraper.

　　Product working principle

　　After the coal slurry and reagents are fully mixed, they are fed into the bottom of the flotation machine's chamber. After the impeller rotates, negative pressure is formed in the wheel cavity, causing the slurry at the bottom and in the tank to enter the mixing zone through the lower and upper suction ports of the impeller, respectively. This also allows air to enter the mixing zone along the air guide sleeve, where the slurry, air, and reagents mix. Under the centrifugal force of the impeller, the mixed slurry enters the mineralized area, the air forms bubbles and is crushed, fully contacts with the coal particles, forming mineralized bubbles. Under the action of the stator and turbulence plate, it is evenly distributed on the section of the tank body, and moves upward into the separation area. The foam layer is formed by the enrichment, and discharged by the foam scraping mechanism, forming the cleaned coal foam. The unmineralized coal particles on the bottom of the trough will be mixed, mineralized, and separated again through the circulation holes and upper suction ports. The part of the slurry that is not sucked in by the impeller at the bottom of the tank enters the bottom of the second chamber through the intermediate ore box buried in the slurry. After completing the entire process of the chamber, it enters the third chamber. The flotation machine repeats this process, and the slurry enters the tailings tank after passing through the last chamber to discharge the final tailings.

　　SFCharacteristics of flotation machine

　　1. High suction capacity and low power consumption.

　　2. Each tank has triple functions of suction, slurry suction, and flotation, forming its own flotation circuit without the need for any auxiliary equipment. It is horizontally configured to facilitate process changes.

　　3. Reasonable circulation of slurry can minimize the sedimentation of coarse sand.

　　4. Equipped with an automatic control device for the slurry surface, easy to adjust.

　　5. The impeller has upper and lower blades that tilt backwards. The upper blade generates upward circulation of slurry, while the lower blade generates downward circulation of slurry.

　　Working principle of flotation machine:

　　The flotation machine is an important device for realizing the flotation process. After wet grinding, the minerals that have been basically separated are adjusted to a certain concentration of pulp, which is fully mixed with flotation reagents in the agitation tank and then sent to the flotation machine. The flotation machine (mine flotation machine) drives the impeller to rotate by the triangular drive of the motor, generating centrifugal force to form negative pressure. On the one hand, it absorbs sufficient air to mix with the pulp, on the other hand, it stirs the pulp and drugs, and at the same time refines the foam, so that the minerals are bonded to the foam. Through inflation and mixing, the target minerals to be selected are attached to the bubbles, forming a mineralized foam layer on the pulp surface, which is scraped out by the scraper or overflowed by itself, becoming foam products (concentrates). The height of the ram controls the liquid level so that useful foam can be scraped out by the scraper. Non foam products are discharged from the bottom of the tank. The performance of the beneficiation equipment is an important factor affecting flotation technology.

AfterSalesService :

• flotation machine