Recommended strength of modified asphalt waterproof coating factory
Category:
fine chemicals /Fine Chemicals for Construction/Other building additives
Model:
APM-100
Brand:
Haiyan Xingye
model:
APM-100
Main ingredients:
asphalt
color:
black
odor:
none
density:
tall
water-soluble:
good
Applicable dosage:
1gk painted 3 square meters
Minimum operating temperature:
-5
Maximum operating temperature:
forty
shelf life:
12 months
Packing Specification:
20kg
manufacturer:
Mengtai Weiye
Retail Price
200.00USD
重量
kg
- Product Description
-
model APM-100
Main ingredients asphalt
color black
odor none
density tall
water-soluble good
Applicable dosage 1gk painted 3 square meters
Minimum operating temperature -5
Maximum operating temperature forty
shelf life 12 months
Packing Specification 20kg
manufacturer Mengtai Weiye
Description :
FYT-1Road and Bridge Asphalt Waterproof Coating Online Ordering Phone
FYT underground engineering asphalt waterproof coating first-hand source
Asphalt waterproof and anti-corrosion coating strength factory order
New quotation consultation for roof asphalt waterproof coating
This product is odorless, environmentally friendly, and suitable for cold construction; Has rubber elasticity and low-temperature flexibility; Strong shear resistance, able to withstand long-term loads on the bridge deck and withstand compressive requirements, can prevent structural damage caused by water seepage, and delay the service life of highway bridges. It is an ideal waterproof material for bridge decks, and can also be used for waterproofing, anti-seepage, anti-corrosion, and wall waterproofing and moisture prevention in projects such as roofs, underground, tunnels, and tunnel bodies. This waterproof material not only has good waterproof performance, but also can absorb stress and noise from road and bridge deck layers, serving as a stress absorbing layer; Due to its inherent elasticity and plastic deformation ability, it can withstand loads without being damaged. Relieve the aging of road and bridge deck layers.
Main technical indicators (according to the requirements of JT/T 535-2004 "Water based Asphalt Waterproof Coating for Roads and Bridges" standard)
serial number
project
type
Ⅰ
Ⅱ
one
appearance
After stirring, it becomes a black or blue brown homogeneous liquid, and there are no obvious particles adhering to the stirring rod.
two
Solid content,%
≥43
three
Table drying time, h ≤
four
four
Practical time, h ≤
twelve
five
Heat resistance, ℃
140±2
160±2
No flow, sliding, or dripping
six
Impermeability, 0.3Mpa, 30min
impermeable
seven
Frost resistance, -20 ℃
20 times without cracking
eight
Flexibility, ℃
-15±2
-20±2
crack-free
nine
Extensibility, mm
No processing
≥5.5
≥6.0
processed
≥3.5
≥4.5
ten
High temperature shear resistance (60 ℃), mpa
zero point one six
eleven
Adhesion, Mpa ≥
zero point four
twelve
corrosion resistance
Alkali resistant (20 ℃)
Soaking in Ca (OH) 2 for 15 days without any abnormalities
Salt water resistance (20 ℃)
Soak in 3% saline for 15 days without any abnormalities
AfterSalesService :
Key words:- Hebei asphalt waterproof coating
More Products
