Consultation/Construction of Asphalt Cold Patch Products in Tongzhou District

Description :

　　Tongzhou District Asphalt Cold Patch Product Details Consultation/Engineering construction

　　Recommended manufacturer for ordering Tongzhou Lucheng cold oil asphalt (cold supplement material)

　　Songzhuang Asphalt Cold Patch Self operated Factory/Recommended purchase

　　Majuqiao Cold Asphalt (Cold Patch) Factory Supply Purchase Discount

　　Property community road repair asphalt cold patching material

　　Pipeline pit repair, cold replenishment material (cold oil), same city delivery

　　Tongzhou District Taihu, Yongle Store, Yu Jiawu, Beiyuan, Yongshun, Liyuan, Songzhuang, Xiji Online Ordering, Free Delivery

　　BeijingDue to the high traffic volume and severe road damage, urban roads are repaired with cold oil, cold patching materials, and cold asphalt for construction purposesrush repairConstruction, cold oil does not require heating, does not require large machinery, and road construction is convenient and fast.

　　Changping, BeijingCold asphalt, asphalt cold oil, cold asphalt mixture, asphalt binder,Asphalt blocks, asphalt mastics, asphalt waterproof coatings, asphalt road protectants,Manufacturer's source of goods, reliable quality, free construction technology, technical consultation, is a good material for small area road repairOnline consultation and quotation, factory appointment for delivery.

　　The applicable environmental temperature range is wide, ranging from -30 degrees to 40 degrees, and can be used for construction in rainy and snowy weather as well as in water accumulation pits.

　　Application of cold replenishment material:

　　Cold repair materials have good adhesion with different substrates such as asphalt concrete and cement concrete, and can be widely used for repairing and maintaining various road surfaces such as highways, general roads, roads, bridges, etc.

　　Usage method of cold replenishment material:

　　Generally, the pit with repair and the surrounding gravel and waste residue should be cleaned up, and there should be no mud, ice or other debris in the pit. Repair of highways and road engineering. The repaired pits and trenches should have neat edges, and the removal of waste residue should be done until a solid and sturdy surface is visible.

　　Add enough cold patching material into the pit until it is about 1.5cm above the ground. After filling, the pit should be higher than the surrounding road surface and curved. When the depth of road surface damage is more than 5cm, the filling work should be done in layers of 4cm each.

　　After compacting layer by layer and laying evenly, manual compaction, vibration plate compaction, roller compaction and other methods are used.

　　After compaction, a layer of stone powder or fine sand can be evenly sprinkled on the surface, and a cleaning tool can be used to sweep back and forth to fill the surface gaps with fine sand. The surface of the repaired groove should be smooth, flat, and free of wheel marks. The edges and corners of the groove must be compacted and free of loose particles. The compaction degree of ordinary repairs should reach 93% or more.

　　Cold replenishment construction:

　　Using cold repair materials, there is no need to stick layer oil during repair, and the materials can be taken as needed without the need for heavy construction machinery. Depending on the different repair conditions of the road surface, impact compaction, manual compaction, etc. can be used.

AfterSalesService :

• Yongle Store Cold Supplement