100kN laboratory calibration measurement standard force gauge, high-precision S-type tension sensor, 10 tons

Description :

100kN laboratory calibration measurement standard force gauge, high-precision S-type tension sensor, 10 ton product introduction and descriptionShenzhen Youzhongli Technology Co., Ltd. requires more weighing and force sensors with rated loads ranging from 0.1kg to 3000t and 1N to 30000KN (all ranges are available and customization is acceptable)

100kN laboratory calibration measurement standard force gauge, high-precision S-type tension sensor, 10 tons：

　　A standard force gauge is a highly accurate and reliable force (torque) measurement instrument. After years of improvement, this instrument can be applied in fields such as force (or torque) measurement, weighing control, sensor adjustment and detection, material performance testing, stress-strain measurement, transient peak measurement, etc. It has the advantages of high reliability and stability, complete functions, high measurement accuracy, convenient use, and intuitive display. It is the most ideal tool for measurement technology institutions to transmit, verify, calibrate, and perform performance testing of force, quality, hardness, etc.

　　The usage method of standard force measuring instruments is particularly important. Improper operation may affect the service life of the force measuring instrument and cause damage to the instrument. We hope the following methods can be helpful to you.

　　1. It is made according to the principle that the greater the tension applied to the spring, the longer the spring will elongate;

　　2. Observe smaller scale values: What N does each small grid of the spring scale represent;

　　3. Observation range: Observe the larger scale value on the spring scale panel, and be careful not to apply force beyond its range;

　　4. Apply tension along the central axis of the spring on the spring scale;

　　5. Zero point calibration: Check if the pointer is pointing to the zero position. If not, adjust it to the zero mark;

　　Before use, gently pull the spring a few times to avoid it getting stuck;

　　7. Observe that the pointer reading line is perpendicular to the scale line;

　　Before measurement, the spring should naturally sag and check if the pointer is aligned with the zero mark;

　　9. The measured force cannot exceed its measurement range;

　　1、 Product Introduction:

　　The YL-325 standard load detection system is a load (force) measurement system developed using cutting-edge technology, based on the full absorption of similar products at home and abroad. Can be used for force measurement and calibration in provincial and municipal standard force testing laboratories, metrology and testing institutions, and enterprises.

　　2、 Main features:

　　1. The YL-325 standard load gauge is composed of a true color touch screen display and dual channel 24 bit ADCPU conversion. The housing is processed using aluminum wire drawing method, giving it a high-end appearance;

　　2. The power supply and data transmission are integrated into a standard USB port, which allows for convenient power supply through a universal mobile phone power adapter or computer USB port. It can also be used as a backup power source with a power bank, and can work for up to several tens of hours.

　　3. The standard load sensor is a force sensor independently designed by our company and has been in production for many years. After market testing, it has extremely high stability and accuracy up to 0.1 level.

　　3、 Main technical indicators:

　　1. Comprehensive accuracy:<0.3% FS (repeatability, linearity).

　　2. Range: 1000N~30MN (can be connected to various sensors of 1000N~30MN)

　　3. Display digits: 6 or 7, resolution: 100000 to 1 million, optional.

　　4、 Configuration:

　　1. YL-325 standard load dynamometer includes: standard dynamometer, power cord, power converter, and aluminum box.

　　2. The standard load sensor includes: sensor, signal line (standard length 2.5-16 meters), and aluminum box.

AfterSalesService :

• High precision S-type tensile sensor weighing 10 tons