H6E-C3-50KG-2B-S1 American Zemic brand weighing sensor

Description :

H6E-C3-50KG-2B-S1 American Zemic brand weighing sensor detailed descriptionThe main products include weighing sensors, weighing modules, force sensors, various customized weighing force sensors, weighing displays, and standard force measuring instruments. The registered capital of the enterprise is 10 million yuan, covering an area of 4500 square meters. The annual production capacity is 200000 various weighing/force sensors and 50000 applied instruments and meters. In 2015, the enterprise was listed as one of the 1000 sustainable development supported enterprises in the province by the Provincial Economic and Information Commission.

H6E-C3-50KG-2B-S1 American Zemic brand weighing sensor：

　　Stainless steel material (B6E), alloy steel material, nickel plating (H6E), three beam structure, adhesive seal, pressure bearing.

　　Protection level: IP67

　　Suitable for electronic pricing scales, electronic platform scales, belt scales, and various electronic weighing devices.

　　Zui Large Scale Platform Size: 400mmx400mm

　　H6E-C3-20KG-2B weighing sensor H6E-C3-30KG-2B weighing sensor

　　H6E-C3-50KG-2B weighing sensor H6E-C3-75KG-2B weighing sensor

　　H6E-C3-100KG-2B weighing sensor H6E-C3-150KG-2B weighing sensor

　　H6E-C3-200KG-2B weighing sensor H6E-C3-300KG-2B weighing sensor

　　H6E-C3-20KG-2B-S1 weighing sensor H6E-C3-30KG-2B-S1 weighing sensor

　　H6E-C3-50KG-2B-S1 weighing sensor H6E-C3-75KG-2B-S1 weighing sensor

　　H6E-C3-100KG-2B-S1 weighing sensor H6E-C3-150KG-2B-S1 weighing sensor

　　H6E-C3-200KG-2B-S1 weighing sensor H6E-C3-300KG-2B-S1 weighing sensor

　　1、 Sensitivity selection

　　Usually, within the linear range of a weighing sensor, it is desirable to have higher sensitivity for better results. Because only when the sensitivity is high, the output signal value corresponding to the measured signal is relatively large, which is beneficial for signal processing. When the sensitivity is too high, the overload capacity of the sensor is low, which affects its service life. External noise unrelated to the measured object will also be amplified by the amplification system, affecting the measurement accuracy. Therefore, it is required to choose the appropriate sensitivity according to one's own requirements. For example, if it is ensured that there will be no overload during long-term use, a sensitivity of 1.5MV/V or above can be selected and weighed within 30% to 70% of the full range. If overload loads are frequently generated and dynamic impacts are likely to occur, it is necessary to choose a range that exceeds the overload force, reduce the sensitivity of the sensor, and improve the overload capacity. You can contact our technical support for overload selection. Our technical support will provide appropriate sensitivity and range according to your requirements.

　　2、 Stability selection

　　The ability of a sensor to maintain its performance unchanged after a period of use is called stability. The factors that affect the long-term stability of sensors, in addition to their own structure, are mainly the usage environment. Therefore, in order for sensors to have good stability, they must have strong environmental adaptability. Before selecting a sensor, it is necessary to investigate its usage environment and choose a suitable sensor based on the specific usage environment, or take appropriate measures to reduce the impact of the environment. At the same time, economic considerations need to be taken into account, as sensors used in special environments are more expensive than those used in general environments.

H6E-C3-50KG-2B-S1 American Zemic brand weighing sensor picture：

AfterSalesService :

• H6E-C3-50KG-2B-S1