Portable handheld push-pull meter 300N plate type force sensor 800kN

Description :

　　Portable handheld push-pull meter 300N plate type force sensor 800kN Detailed description: The company mainly produces and sells weighing sensors and force sensors. Various customized non-standard sensors, large tonnage force sensors, column type load sensors with a large range of 10 to 2000 tons, spoke type load sensors with a tensile and compressive force of 1 to 1000 tons, cylinder type load sensors with a tensile and compressive force of 100 to 500 tons, matched with high-precision standard force measuring instruments, and specialized digital displays for force measurement with 1 to 20 channels. Welcome to inquire by phone

　　Portable handheld push-pull meter 300N plate type force sensor 800kN:

　　1. High precision and high resolution.

　　2.6-inch large screen display.

　　3. Backlight function.

　　4. Flip function of LCD display screen.

　　5. Automatic shutdown time setting function.

　　6. Battery capacity display function.

　　7. Six testing modes and three display modes are available for selection, greatly improving testing efficiency. There are three measurement units available for selection and conversion: N (Newton), kg (kilogram), and lb (pound). The gravity acceleration setting function allows users to input the accurate value of the gravity acceleration at their location. Make testing and unit conversion more accurate.

　　8. Peak holding function. Maintain peak display until manually reset.

　　9. Data storage function, capable of storing 896 test values.

　　10. Data output function, which can input data into the computer through a data cable for various analyses.

　　11. Upper and lower limits as well as comparative values can be set for statistical analysis.

　　12. Green and environmentally friendly, automatically shuts down after 10 minutes of inactivity.

　　13. Automatic peak function, keep displaying peak value for 2 seconds and then automatically release.

　　14. High quality charging power supply. The charging voltage can be used from 100V to 240V, which can adapt to most regions both domestically and internationally. There are also short-circuit, leakage, and overload protection functions.

　　15. The unique switch connection point breaking force testing function makes the switch breaking force testing more accurate.

　　16.2 sets of installation dimensions, suitable for various testing machines at home and abroad, convenient for users to install and use on the machines.

　　JJF1469-2014 (Calibration Specification for Strain Gauge Sensor Measuring Instruments), JJG144-2007 (Verification Regulations for Standard Force Measuring Instruments),

　　JJG557-2011 (Standard Torque Meter Verification Regulations), JJG391-2009 (Load Sensor Verification Regulations),

　　OIML-R60 (GUO International Legal Metrology Organization Technical Standard for Weighing Sensors)

　　The NIM-ZY-LS-CL-035 standard load measuring instrument testing/calibration rules, registered with the China Institute of Metrology, are the preliminary technical standards based on which the current dynamometer indicator instrument testing/calibration is carried out. They have been replaced by the JJF1469-2014 standard.

AfterSalesService :

• Portable handheld push-pull meter 300N