Ningbo Keli AMI-100kg weighing sensor 100kg single point sensor

Description :

　　Ningbo Keli AMI-100kg weighing sensor 100kg single point sensor detailed description: The company mainly produces and sells weighing sensors and force sensors. Various customized non-standard sensors, large tonnage force sensors, column type load sensors with a large range of 10 to 2000 tons, spoke type load sensors with a tensile and compressive force of 1 to 1000 tons, cylinder type load sensors with a tensile and compressive force of 100 to 500 tons, matched with high-precision standard force measuring instruments, and specialized digital displays for force measurement with 1 to 20 channels. Welcome to inquire by phone

　　Ningbo Keli AMI-100kg weighing sensor 100kg single point sensor:

　　Product Overview:

　　--The shear stress measurement method can withstand tension and pressure. Good output symmetry, compact structure, easy installation, high precision, and good stability. Can be used to manufacture scales such as hook scales, hopper scales, and electromechanical combination scales.

　　--Can meet the measurement range of 0.05kg-300kg.

　　--Aluminum alloy material, parallel beam structure

　　--Silicone rubber seal, anodized surface, excellent corrosion resistance.

　　--Overall structure, easy to install and use.

　　--Suitable for various electronic weighing devices such as electronic pricing scales and electronic platform scales.

　　Product features and advantages:

　　--Applicable platform: Suitable for platform scales

　　--Comprehensive error: ± 0.02% F.S

　　--Rated output: 2.0000 ± 0.001MV/V

　　--Material: Alloy Steel, Aluminum Alloy;

　　--Protection level: IP67/IP65

　　--Reference standard: GB/T7551-2008/OIML R60

　　--Range: 0.05kg to 300kg;

　　--High precision

　　--Scale platform size 450 * 450mm

　　AMIC-60kg,AMIC-100kg,AMIC-150kg,AMIC-250kg。

　　BMI-50kg,BMI-100kg,BMI-150kg,BMI-300kg,BMI-500kg,BMI-1000kg,BMI-2000kg。

　　AMI-6kg,AMI-8kg,AMI-15kg,AMI-30kg,AMI-50kg,AMI-100kg。

　　AMIB-5kg,AMIB-10kg,AMIB-15kg,AMIB-20kg,AMIB-30kg,AMIB-50kg,AMIB-100kg。

　　UDB-15kg,UDB-30kg,UDB-50kg,UDB-100kg,UDB-200kg。

　　UDE-30kg,UDE-100kg,UDE-200kg。

　　On site installation case

　　The installation form of this type of tension sensor is the installation form of a fixed base sensor. During installation, the sensor is placed inside three fixed stop columns of a wireless hook scale. Therefore, it is required to be used in situations where the temperature change range is not large. Its advantage is that it can improve the stability of the scale body and is easy to install and debug. When installing the weighing sensor, attention should also be paid to:

　　To prevent high current from flowing through the sensors, short-circuit plates should be installed between the sensors to prevent accidental high current from burning them out. Even so, the best way to perform electronic weighing when welding is to remove the pressure sensor and install the weighing sensor after several operations are completed.

　　2. The indenter should be made of 20mm thick chrome steel, and the bottom surface of the indenter should be machined into a circular arc with a radius of at least three times the radius of the sensor dome. Heat treatment should be carried out to increase the hardness of the indenter. The fixing plate should be made of 45 steel with a thickness of not less than 20mm, and the levelness during installation should not exceed ± 0.5 °.

　　3. Moving parts such as ball bearings should slide freely and should not be stuck or corroded

AfterSalesService :

• 100kg single point sensor