15t spoke type tension and pressure sensor with transmitter 4-20mA Youzhong force measurement sensor

Description :

15t spoke type tension and pressure sensor with transmitter 4-20mA Youzhong force measurement sensorThe spoke sensor has high accuracy and good long-term stability. The flange type is easy to install at the bottom or top of various hydraulic cylinders, and can be easily combined with various fixtures or ball joints. It is easy to install and maintenance free.

15t spoke type tension and pressure sensor with transmitter 4-20mA Youzhong force measurement sensor

　　Key points for installing weighing sensors

　　1. Weighing sensors should be handled with care, especially for small capacity sensors that use alloy aluminum materials as elastomers. Any impact or drop caused by vibration is likely to cause significant output errors.

　　2. Determine the rated load of the sensor used by selecting the range of the weighing sensor according to its instructions.

　　3. In terms of horizontal adjustment. If a weighing sensor is used, the installation plane of its base should be adjusted with a spirit level until it is level; If multiple sensors are measuring simultaneously, the mounting surfaces of their bases should be kept as horizontal as possible to ensure that the force borne by each sensor is basically the same.

　　4. When designing and installing the loading device, it should be ensured that the loading force acts on the axis of the weighing sensor, so as to minimize the effects of tilting and eccentric loads.

　　5. Cover the weighing sensor with some baffles around it. The purpose of doing so is to prevent debris from falling into the moving parts of the sensor, which can affect its measurement accuracy.

　　6. Add a bypass device made of copper braided wire at both ends of the load cell loading device.

　　7. The cable should not be lengthened by itself. If it is necessary to lengthen, it should be soldered at the joint and sealed with moisture-proof sealant.

　　8. To prevent chemical corrosion It is advisable to apply Vaseline to the outer surface of the weighing sensor during installation. The use of the platform should avoid direct sunlight and sudden changes in environmental temperature.

　　9. The cable of the sensor should be kept away from strong power lines or places with pulse waves. If competition cannot be avoided, the cable of the weighing sensor should be separately threaded into the iron pipe and the connection distance should be shortened as much as possible.

　　Shenzhen Youzhongli Technology Co., Ltd. requires more weighing and force sensors with rated loads ranging from 0.1kg to 3000t and 1N to 30000KN (all ranges are available and customization is acceptable);

AfterSalesService :

• 15t spoke type tension and pressure sensor