10 ton tank scale sensor HM8-C3-10T-6.5B7-A American Zemic weighing sensor

Description :

10 ton tank scale sensor HM8-C3-10T-6.5B7-A American Zemic weighing sensor detailed description:

　　10 ton tank scale sensor HM8-C3-10T-6.5B7-A American Zemic weighing sensor:

　　In any case, the power and control wires should be twisted together at a speed of 50 revolutions per meter. If the sensor signal wire needs to be extended, a specially sealed cable junction box should be used. If this type of junction box is not used and cables are directly connected (soldered ends), special attention should be paid to sealing and moisture resistance. After connection, the insulation resistance should be checked and meet the standard (2000-5000M). If necessary, the sensor should be recalibrated. If the signal cable is very long and high measurement accuracy needs to be ensured, a cable compensation circuit with a relay amplifier should be considered

　　Horizontal adjustment: Horizontal adjustment has two aspects. One is that the installation plane of a single sensor mounting base needs to be adjusted horizontally with a level, and the other is that the installation surfaces of multiple sensor mounting bases should be adjusted to a horizontal plane as much as possible (using a level), especially in weighing systems with more than three sensors. The main purpose of this is to ensure that the loads borne by each sensor are basically the same. The loading direction of each weighing sensor is determined, and when we use it, we must load in this direction. Lateral forces, additional bending moments, and torque forces should be avoided as much as possible.

　　If everyone strictly follows the above operation and use, the measurement results obtained by the weighing sensor will be more convenient and easy to use. Moreover, the weighing sensor will not be easily damaged, and its lifespan and maintenance can be improved!

　　Weighing sensor is a commonly used gravity measuring instrument, which has a wide range of applications in multiple industries. When choosing a weighing sensor, users need to pay attention to the key points of its selection. If the selected weighing sensor is not suitable, it is easy to cause the weighing sensor to malfunction. Today, the editor will introduce the key points for selecting weighing sensors in detail, hoping to help everyone.

　　【 Shenzhen Youzhongli Technology Co., Ltd. 】 Main products and services:

　　Sensor series: weighing sensor, dynamic/static load weighing module, force sensor, large range force sensor (100t-2000t), tension and pressure sensor

　　Control instruments: weighing instruments, force measuring instruments, standard force measuring instruments (1-20 channels), digital display instruments, weight transmitters, handheld digital display force measuring instruments

　　Control System: Weighing System, Automated Weighing, Force Measurement Control System

　　Force measurement system: 0.1 level, 0.3 level, 0.5 level force measuring instrument 0-30000kN

　　For more details, please call Shenzhen Youzhongli Technology Co., Ltd. to meet your needs:

AfterSalesService :

• HM8-C3-10T-6.5B7-A