2-ton S-type force sensor 20kN standard force gauge 0.1 level

Description :

2-ton S-type force sensor 20kN standard force gauge 0.1 levelDetailed description: Suitable for force measurement calibration, various measurement and force standard laboratories, automated force measurement, industrial force measurement, university experiments, metrology institutes, research institutes, measurement and testing institutions, and other industries' measurement and testing. Discounted price, high-precision force measuring instrument, can come with calibration certificate from the National Institute of Metrology, and comes with an 18 month warranty

　　The installation of the force measuring instrument should ensure that its main axis and the loading axis of the force base (standard) machine are not at a critical angle

　　The pressure measuring instrument should generally be equipped with upper and lower pressure pads. The supporting surface and bottom surface of the force measuring instrument should be smooth, with rust, scratches, and debris.

　　Suitable connectors should be used at both ends of the tensile force gauge to ensure that the force base (standard) machine can safely apply axial force to the force gauge.

　　Verification equipment

　　The extended uncertainty of the force value of the force base (standard) machine or loading device used to calibrate various levels of standard force measuring instruments should be more than three times better than the long-term stability or indication error index of the tested force instrument.

　　The primary load for verification is generally 10% to 20% of the rated load, and the verification points should be evenly distributed as much as possible, generally not less than 8 points. When the verification value is less than 10% of the full-scale force value, the two verification points of 5% and 2% of the full-scale force value should be selected.

　　Verify point by point in the order of increasing load. After each level of load is added, hold for a certain period of time (usually 30 seconds) and record the reading value cloud until the rated load is reached. According to the requirements of the inspection unit, the force measuring instrument that needs to undergo process calibration shall be calibrated for the return value point by point according to the decreasing load, until it returns to zero load. At least maintain the zero reading value after reading. If necessary, the zero point of the indicator device needs to be readjusted.

　　Product Features:

　　1. The core technology of AC excitation for high-precision force measurement provides extremely stable measurement capability,

　　2. The ratio voltage provides a measurement capability of 2 million display divisions, with the smallest resolution of 0.001 μ V/V,

　　3. With a real-time peak measurement capability of up to 10000 times per second, it is suitable for peak detection in dynamic and impact applications,

　　4. Bidirectional calibration, bidirectional measurement, bidirectional 6-segment linear correction, optional 6/24/40 channels,

　　5. Peak measurement and holding function, which allows for simultaneous zeroing during peak clearing,

　　6. Both measurement data and calibration data can be printed out,

　　7. Data communication (RS232), three communication output formats,

　　8. One click conversion of units, with load units of N (kN), kg (t), and lb (Klb),

　　9. Two types of calibration methods: loading calibration and sensitivity data mV/V input calibration,

2-ton S-type force sensor 20kN standard force gauge 0.1 level picture:

AfterSalesService :

• 2-ton S-type force sensor