Chinese Aerospace Sensor BK-4C-100t 1000kN Force Sensor

Description :

　　BK-4C-2t 20kN load cell:

　　Therefore, the overload capacity of the weighing sensor and whether the sensor has overload protection still have a certain impact on the reliable operation of the weighing system. There are two performance indicators related to the weighing sensor, one is the allowable overload and the other is the ultimate overload. Allowing overload refers to the condition where the performance indicators of the sensor remain unchanged after removing this load. Extreme overload refers to the condition where the sensor does not produce harmful mechanical deformation under this load. The allowable overload for general sensors is 150%, and the maximum overload is between 200% and 300%. Some sensors with overload protection may exceed a certain range. Due to its special design, the Youzhongli SSD-YL sensor allows for overload up to 500%. This type of sensor can operate reliably even under frequent overload conditions. The protection level of sensors is usually represented by IP. Most sensor manufacturers claim that their products meet the IP67 standard, while a few manufacturers have some products that meet the IP68 standard. We know that the IP code represents the protection level of the electrical product's casing when the voltage does not exceed it.

　　According to the national standard "GB4208-93 Degrees of Protection for Enclosures", IP67 refers to the product's ability to prevent dust and short-term water immersion; IP68 refers to the product's ability to prevent dust and the impact of continuous diving. It should be pointed out that such protection does not include external influences or environmental conditions such as mechanical damage, rust, moisture, etc. This type of protection is usually specified by relevant product standards. The difference between a weighing sensor and general electrical products and secondary instrument products is that it is also a load-bearing component that constantly experiences force and deformation during operation. In addition, there is a possibility of mechanical damage such as vibration, impact, or collision, severe corrosion under the combined action of dust and water vapor, and operation in very humid environmental conditions. This is significantly different from the test conditions specified in GB4208-93.

　　Chinese Aerospace Sensor BK-4C-100t 1000kN Force Sensor:

　　The elastomer is a spoke, spoke, and hard core flat membrane structure with a low external height, used for measuring tensile and compressive forces, and has strong resistance to deflection and lateral forces.

　　High precision, good symmetry of tension and compression output, stable and reliable performance, wide range of measurement, easy installation and use.

　　Tension compression bearing.

　　Suitable for testing various load forces, various tensile and compressive tests, electronic scales, and industrial automation measurement and control systems.

　　BK-4B-100kg,BK-4B-200kg,BK-4B-500kg,BK-4B-1t,BK-4B-1.5t,BK-4B-2t,BK-4B-3t,BK-4B-5t,BK-4B-10t,

　　BK-4C-1t,BK-4C-2t,BK-4C-3t,BK-4C-5t,BK-4C-10t,BK-4C-20t,BK-4C-30t,BK-4C-40t,BK-4C-50t,BK-4C-100t,

　　BK-4D-20kg,BK-4D-50kg,BK-4D-100kg,BK-4D-200kg,BK-4D-500kg,

　　BK-4E-200kg,BK-4E-500kg,BK-4E-1.5t,BK-4E-2.5t,BK-4E-5t,BK-4E-10t,BK-4E-25t,BK-4E-30t,

　　YOLO-LOADCELL, the general agent of AVIC weighing sensors in South China, KELI weighing sensors in South China, ZEMIC weighing sensors in South China, KELI brand sensors in South China, AC brand in the United States, various micro tension and pressure sensors, handheld digital force measuring instruments, various force sensors, large tonnage force sensors, standard force measuring instruments for measurement, torque sensors, welcome to inquire by phone;

AfterSalesService :

• Chinese Aerospace Sensor BK-4C-100t