6kN anti bending machine dedicated force sensor, 10kN measuring and testing standard force gauge

Description :

　　Introduction to 10kN Measurement and Testing Standard Force Gauge for 6kN Anti bending Machine Special Force Gauge: The anti bending special standard force gauge is mainly used for testing cement anti bending testing machines. The sensor has a unique structure, using a cantilever beam structure that is consistent with the cement test block, eliminating the need for installation fixtures. The instrument has a low profile, high accuracy, excellent long-term stability, and strong resistance to lateral forces. The shielding wire is conductive with the body and has strong interference characteristics for strong interference in the use site.

　　JJF1469-2014 (Calibration Specification for Strain Gauge Sensor Measuring Instruments), JJG144-2007 (Verification Regulations for Standard Force Measuring Instruments),

　　JJG557-2011 (Standard Torque Meter Verification Regulations), JJG391-2009 (Load Sensor Verification Regulations),

　　OIML-R60 (GUO International Legal Metrology Organization Technical Standard for Weighing Sensors)

　　The NIM-ZY-LS-CL-035 standard load measuring instrument testing/calibration rules, registered with the China Institute of Metrology, are the preliminary technical standards based on which the current dynamometer indicator instrument testing/calibration is carried out. They have been replaced by the JJF1469-2014 standard.

　　Key points for the structure and selection of force sensors

　　This section provides a brief introduction to the structural styles and characteristics of commonly used force sensors. For more detailed performance and external dimensions, please consult our company. Sensors are described using the accuracy of full-scale error, while standard force gauges are described using the accuracy of equivalent error. Please note the difference between the two. For more detailed information, please refer to JJG391-2009 (Load Sensor Calibration Regulations), JJG144-2007 (Standard Force Gauge Calibration Regulations), and ISO376-2011 (Testing Machine Force Gauge Calibration Specifications);

　　S-type sensor: It is a commonly used structural form for measuring small and medium force values, and can be used for tension or pressure measurement with corresponding accessories. It has good metrological performance and moderate price. The range of measurement is 100N~200kN, and the optimal measurement range is 200N~50kN.

　　Single column sensor: It is a commonly used structure for measuring large and medium force values, with good measurement performance and small weight, and is easy to carry for compression applications. The range of measurement is 30kN~5MN, and the optimal range selection is 100kN~5MN.

　　Torque ring sensor: mainly used for measuring the pressure direction of medium to high force values, with excellent metrological performance, but with a large volume and weight. The range of measurement is 10kN~5MN, and the optimal range selection is 100kN~1MN. This type of sensor is suitable for vertical measurement but not for horizontal measurement due to the lack of fixed screw holes at the bottom.

　　Wheel spoke sensor: mainly used for measuring mid force values in the direction of tension or compression. For large range applications, the sensor has a large weight and volume. The range of measurement is 10kN~3MN, and the optimal range selection is 10kN~200kN.

　　Multi column sensor: mainly used for measuring high force values and pressure applications, with a range of 500kN~50MN and the best range selection range of 1MN~20MN.

　　Central perforated column type: The central perforated column type sensor is a commonly used structure in engineering testing, applied in a tensile or compressive direction, with average measuring performance, simple use, and low price. The range of measurement is 10kN~5MN, and the optimal range is 30kN~1MN.

　　Shaft pin connection type: The shaft pin connection type pull sensor is mainly used for engineering tension measurement of high force values, with average measurement performance, easy installation, and a range of 200kN~10MN. The optimal range selection is 500kN~3MN.

　　Plate ring sensor: mainly used for tensile measurement of medium force values, connected with internal screw holes, with a range of 100kN~500kN and the optimal range selection range of 100kN~400kN.

　　Anti bending machine dedicated sensor: anti bending machine detection dedicated pressure sensor, with a range of 6kN and 10kN;

AfterSalesService :

• 10kN Measurement and Testing Standard Force Gauge