250kg cantilever beam sensor concrete mixing scale sensor 500kg Youzhong force sensor in stock

Description :

　　250kg cantilever beam sensor concrete mixing scale sensor 500kg detailed description:

　　Weighing sensor is a commonly used gravity measuring instrument, which has a wide range of applications in multiple industries. When choosing a weighing sensor, users need to pay attention to the key points of its selection. If the selected weighing sensor is not suitable, it is easy to cause the weighing sensor to malfunction. Today, the editor will introduce the key points for selecting weighing sensors in detail, hoping to help everyone. 1. The ability of a sensor to maintain its performance unchanged after a period of use is called stability. The factors that affect the long-term stability of sensors, in addition to their own structure, are mainly the usage environment. Therefore, in order for sensors to have good stability, they must have strong environmental adaptability. Before selecting a sensor, it is necessary to investigate its usage environment and choose a suitable sensor based on the specific usage environment, or take appropriate measures to reduce the impact of the environment. The environment can have the following effects on pressure transmitters: 1. High temperature environments can cause the coating material of the sensor to melt, solder joints to open, and structural changes in the stress inside the elastic body. 2. Outdoor dust and humidity can cause short circuits in sensors. 3. In environments with high corrosiveness, such as humidity and acidity, the sensor may suffer from damage to the elastic body or short circuits. 4. The impact of electromagnetic fields on sensor output disorder signals. 5. Special explosion-proof sensors must be selected for flammable and explosive environments. The stability of sensors has quantitative indicators, and after exceeding the service life, they should be recalibrated before use to determine whether the performance of the sensor has changed. In some situations where sensors are required to be used for a long time and cannot be easily replaced or calibrated, the stability requirements for the selected sensors are more stringent, and they must be able to withstand long-term tests. 2. The choice of sensitivity is usually within the linear range of the sensor, and the higher the sensitivity, the better. Because only when the sensitivity is high, the output signal value corresponding to the measured signal is relatively large, which is beneficial for signal processing. But when the sensitivity is high, external noise unrelated to the measured object will also be amplified by the amplification system, affecting the measurement accuracy. Therefore, it is required that the sensor itself should have a high signal-to-noise ratio and minimize the interference signals introduced from the outside. 3. The selection of sensor quantity and range is based on the purpose of the electronic scale and the number of points that the scale body needs to support (the number of support points should be determined according to the principle of making the geometric center of gravity of the scale body coincide with the actual center of gravity). The selection of sensor range can be determined based on a comprehensive evaluation of factors such as the weighing value of the scale, the number of sensors selected, the weight of the scale body, possible bias and dynamic loads. Based on experience, sensors should generally operate within 30% to 70% of their range. However, for scales with high impact forces, when selecting sensors, they should generally operate within 20% to 30% of their range to ensure their safety and lifespan. The application of sensors in commercial electronic scales is currently very popular, and they will gradually replace traditional pole scales and mechanical cutting scales. The electronic pricing scale has a significant feature in the structure of the weighing platform: a relatively large weighing platform with only a specially designed sensor installed in the middle to bear all the weight of the material. The image measuring instrument is based on artificial intelligence technologies such as automatic edge extraction, automatic matching, automatic focusing, measurement synthesis, and image synthesis using machine vision. It has excellent functions such as automatic measurement where to go, CNC positioning automatic measurement, automatic learning batch measurement, image map target guidance, and full field eagle eye enlargement. Meanwhile, based on machine vision and micro control, self The autofocus process below can meet the needs of auxiliary measurement in clear images, and can also be completed by adding touch point probes for coordinate measurement. Excellent software performance supporting spatial coordinate rotation, capable of batch measurement and SPC result classification when workpieces are placed randomly or fixtures are used. For more information, please consult Shenzhen Youzhongli Technology Co., Ltd

AfterSalesService :

• 250kg cantilever beam sensor