BK-4B-2000N spoke type force sensor 2kN force value weighing sensor

Description :

　　BK-4B-2000N spoke type force sensor 2kN force value weighing sensor detailed description:

　　Principle of spoke type sensor:

　　Due to its shape resembling a wheel with wheels, we call it a spoke sensor. Due to its low height, it is also known as a low profile sensor. The outstanding advantages of this sensor include low height, high accuracy, good linearity, strong resistance to bias load and lateral force, etc. It can be used to measure pressure and tension, making it particularly suitable for weighing and force measurement

　　Main principles of structural design for spoke type sensors

　　It has good rigidity. In order to maintain the stable working state of the sensor and reduce the influence of external vibration interference, the elastic displacement of the elastic body under load should be reduced as much as possible, so that it has a higher natural frequency

　　There should be a simple and reasonable overall structure. The elastomer should be as a whole as possible, avoiding modular structures. Reduce the impact of factors such as loose fastening and welding deformation

　　It is insensitive to changes in the position of the applied force and the influence of interference force. The stress distribution in the strain sensitive area of the elastic body only changes with the magnitude of the applied force. The working area of the elastic body has good process performance, including good mechanical processing, bonding, and sealing installation processes. Having a low profile structure, easy installation, good interchangeability, and a low profile structure can enhance resistance to eccentric loads, making the working state stable.

　　Installation method of spoke type sensor

　　Wheel spoke weighing sensors belong to force sensors and are commonly used for static and dynamic measurements. The principle is that the elastic body (elastic element, sensitive beam) undergoes elastic deformation under external force, causing the resistance strain gauge (conversion element) attached to its surface to also deform. After the resistance strain gauge deforms, its resistance value will change (increase or decrease), and then the corresponding measurement shop will convert this resistance into an electrical signal, thus completing the process of converting external force into an electrical signal.

　　The installation method of spoke weighing sensors varies depending on the type of sensor used. Overall, weighing sensors require one location for fixation and one location for force application. To ensure the safety and reliability of the lonely section, and to prevent overloading during the stressed section. After Zui, the wiring method for the spoke weighing sensor is the common four core shielded wire used for weighing sensors. Generally, the excitation power supply voltage is 5-10VDC, with red connected to the positive power supply, black connected to the negative power supply, and green and white connected to the instrument signal. The green signal is positive, the white signal is negative, and there is also a thick wire that is shielded and can be grounded or connected to the casing,

　　YOLO-LOADCELL, a brand of Youzhongli, is a large through hole force sensor and customized non-standard force sensor. It has an annual production capacity of over 1000 sets, including up to 200 tons of force sensors provided year-round, 300 sets of dedicated force sensors for over 500 tons, 120 sets of pressure sensors for over 1000 tons, various aluminum weighing sensors, alloy steel weighing sensors, stainless steel weighing sensors, and micro tension and pressure sensors. It has an annual production capacity of over 15 units, over 2000 standard force measuring instruments for measurement, and over 5000 units of various weighing and force measuring instruments. The sensor accuracy is C3, and some products can reach C6 level ultra-high precision,

AfterSalesService :

• BK-4B-2000N