BK-4B-1T weighing sensor with 0-10V transmitter

Description :

　　BK-4B-1T weighing sensor with 0-10V transmitter detailed instructions:

　　BK-4B-1T weighing sensor with 0-10V transmitter

　　The elastomer is a spoke type, perforated, hard core flat membrane structure with a low external height, used for measuring tensile and compressive forces, and has strong resistance to deflection and lateral forces

　　High precision, good symmetry of tension and compression output, stable and reliable performance, wide range of measurement, easy installation and use

　　Tension compression bearing

　　Suitable for testing various load forces, various tensile and compressive tests, electronic scales, and industrial automation measurement and control systems

　　BK-4B-100kg、BK-4B-200kg、BK-4B-500kg、BK-4B-1t、BK-4B-1.5t、BK-4B-2t、

　　BK-4B-3t、BK-4B-5t、BK-4B-10t、

　　BK-4C-1t、BK-4C-2t、BK-4C-3t、BK-4C-5t、BK-4C-10t、BK-4C-15t、

　　BK-4C-20t、BK-4C-30t、BK-4C-40t、BK-4C-50t、BK-4C-100t、

　　BK-4C-200t、BK-4C-300t、BK-4C-400t、

　　BK-4D-20kg、BK-4D-50kg、BK-4D-100kg、BK-4D-200kg、BK-4D-500kg、

　　BK-4E-0.2t、BK-4E-0.5t、BK-4E-1t、BK-4E-1.5t、BK-4E-2.5t、

　　BK-4E-5t、BK-4E-10t、BK-4E-25t、BK-4E-30t、

　　The elastic element of the spoke type sensor is a hole structure elastic element, and its entire structure looks like a wheel, and multiple shear beams with fixed supports on both sides are formed by the hub, spokes, and tire. Elastic element of spoke type sensor

　　The shear force elastic element of the pore structure has a low profile and good stability. It is not very sensitive to bending moments, but has good linearity, high lateral stiffness, and strong resistance to directional and eccentric loads. The overall structure is symmetrical, and the thermal expansion in different directions is consistent with each other, with a small temperature coefficient.

　　The hole shaped elastic element adopts a simple drilling process. In order to ensure that the cross-sectional shear beam has greater stiffness and less stress concentration at the root, and the strain area is in a pure shear stress state, the adhesive position of the resistance strain gauge can be used more reasonably. If there are more holes formed by shearing the strain beam, it is easier to obtain the ideal stress area suitable for pasting resistance strain gauges

　　Advantages and disadvantages of spoke sensors

　　Advantages: Strong impact and offset load resistance, not affected by loading points and support edges, with good linearity, fixed installation, easy installation, and good interchangeability.

　　Disadvantages: Complex mechanical processing, high manufacturing costs, easy to lag and difficult to control

　　However, when choosing a sensor, we should pay more attention to the installation conditions of the sensor under the premise of the same accuracy and range parameters. Below, we will compare the spoke sensor with other weighing sensors to determine whether to choose a spoke sensor

AfterSalesService :

• BK-4B-1T