2000kg cantilever beam weighing sensor H8C-C3-2.0t-4B aviation sensor

Description :

　　2000kg cantilever beam weighing sensor H8C-C3-2.0t-4B AVIC sensor detailed description:

　　2000kg cantilever beam weighing sensor H8C-C3-2.0t-4B aviation sensor

　　A weighing sensor is a commonly used weighing instrument that can convert the gravity of the object being measured into a measurable output signal in a certain proportion. It is widely used in industries such as electronics, power, and machinery. There are many issues that users need to pay attention to when installing weighing sensors. Below, the editor will specifically introduce some key points for installing weighing sensors, hoping to help everyone.

　　Key points for installing weighing sensors

　　1. Weighing sensors should be handled with care, especially for small capacity sensors that use alloy aluminum materials as elastomers. Any impact or drop caused by vibration is likely to cause significant output errors.

　　2. When designing the loading device and installing it, it should be ensured that the loading force acts on the axis of the weighing sensor, so as to minimize the effects of tilting and eccentric loads.

　　3. In terms of horizontal adjustment. If a weighing sensor is used, the installation plane of its base should be adjusted with a spirit level until it is level; If multiple sensors are measuring simultaneously, the mounting surfaces of their bases should be kept as horizontal as possible to ensure that the force borne by each sensor is basically the same.

　　4. Determine the rated load of the sensor used by selecting the range of the weighing sensor according to its instructions.

　　5. To prevent chemical corrosion It is advisable to apply Vaseline to the outer surface of the weighing sensor during installation. The use of the platform should avoid direct sunlight and sudden changes in environmental temperature.

　　6. Add a bypass device made of copper braided wire at both ends of the load cell loading device.

　　7. The cable should not be lengthened by itself. If it is necessary to lengthen, it should be soldered at the joint and sealed with moisture-proof sealant.

　　8. Cover the weighing sensor with some baffles around it. The purpose of doing so is to prevent debris from falling into the moving parts of the sensor, which can affect its measurement accuracy.

　　9. The cable of the sensor should be kept away from strong power lines or places with pulse waves. If competition cannot be avoided, the cable of the weighing sensor should be separately threaded into the iron pipe and the connection distance should be shortened as much as possible.

　　10. Determine the rated load of the sensor according to the range selection of the weighing sensor in its instructions. Although the weighing sensor itself has a certain overload capacity, it should be avoided as much as possible during installation and use. Sometimes short-term overloading can also cause sensor damage.

　　11. In high-precision applications, the weighing sensor and instrument should be preheated for 30 minutes before use.

　　A weighing sensor is actually a device that converts a mass signal into a measurable electrical signal output. When using sensors, it is important to consider the actual working environment in which the sensor is located. This is crucial for the correct selection of weighing sensors, as it affects whether the sensor can work properly, its safety and service life, and even the reliability and safety of the entire weighing apparatus. [1] There are qualitative differences between the new and old national standards in the basic concepts and evaluation methods of the main technical indicators of weighing sensors.

　　YOLO LOAD CELL, a brand of Youzhongli in Shenzhen. A well-known brand in the sensor industry. Main research and development, sales of standard force measuring instruments, various large tonnage load measuring sensors, tension and pressure sensors, column standard force measuring sensors, spoke load sensors, multi-channel standard force measuring instruments. The sensor has good accuracy, stability, and fast response. It is commonly used for force measurement of various force measuring equipment, laboratory standard force calibration, and third-party calibration for standard force measurement.

AfterSalesService :

• 2000kg cantilever beam weighing sensor