5T cantilever beam load weighing sensor BK-5A-5T chemical plant weighing sensor 10 tons

Description :

　　5T cantilever beam load weighing sensor BK-5A-5T chemical plant weighing sensor 10 tons detailed description:

　　5T cantilever beam load weighing sensor BK-5A-5T chemical plant weighing sensor 10 tons

　　The principle of the shear beam weighing sensor is that after the elastic body is subjected to force, it needs to measure not only its normal stress, but also the shear stress caused by the shear force. However, the shear stress itself cannot be measured. It can only occur from the principal stress perpendicular to the central axis of the I-beam at a 45 "angle, that is, from the tensile stress and compressive stress caused by the shear stress. Therefore, four strain gauges are attached to both sides of the web plate of the I-beam at a 45" angle perpendicular to the central axis.

　　Automatic weighing and loading device. Each loaded box or bag moves along the conveyor belt until it is under the electronic scale containing the material. The conveyor belt stops moving, electromagnetic coil 2 is powered on, and the electronic scale hopper flips to pour all the material into the box or bag. When the material is poured out, the conveyor belt motor is powered on again to remove the filled box or bag and protect the conveyor belt from continuing to run until the next empty bag or box cuts off the light source of the photoelectric sensor. At the same time, the electronic scale box is reset, electromagnetic coil 1 is powered on, and the funnel automatically feeds the electronic scale. The weight is controlled by the microcomputer. When the material in the electronic scale is equal to the given value, electromagnetic coil 1 is powered off, and the spring force closes the funnel door. The loading system begins the next loading cycle. When there are enough materials in the funnel and boxes on the conveyor belt, this process can continue continuously. When necessary, the operator can stop the conveyor belt at any time, input different given values through the dial, and then restart to change the weight in the box or bag.

　　This system uses different sensors to change the weighing range, which can be applied to automatic packaging in industries such as cement, sugar, and flour processing.

　　The 1000t pressure sensor combined with a jack produces greater working capacity, especially for use in narrow spatial locations, and has functions such as lightweight, flexible, and strong pushing force. This product is widely used for monitoring engineering force values in power, chemical, steel, bridge, machinery, and other fields, and can also unleash its infinite power. 3-year long-term stability of 0.05% F.S, in compliance with the national metrological verification standard of 0.3%. Welcome to call and place an order.

AfterSalesService :

• 5T cantilever beam load weighing sensor