Hydraulic press force sensor 650t with amplifier 0-10V

Description :

　　The 650t hydraulic press force sensor with an amplifier of 0-10V is used for pressure measurement in the construction industry, road and bridge construction sites, various tensile and prestressing tests, various gas and oil pressure tests, oil field bearing tests, and can be sent for third-party verification of 0.1 level and 0.3 level verification certificates,

　　The working principle of a load cell (weighing sensor) is that the sensor works based on the piezoelectric resistance embedded in the silicon wafer, and its resistance increases when it is bent by any external force. The sensor concentrates the applied force directly onto the silicon sensing element through a stainless steel ball, and the change in resistance value is proportional to the magnitude of the applied force. The change in circuit resistance causes a corresponding change in the MV output level.

　　Force sensors (weighing sensors) are mainly used in medical infusion pumps, movable non inverted pressure pumps, blockage detection, renal dialysis machines, load and pressure sensing, variable tension control simulation, robot end sensors, wire bonding equipment, and many other applications.

　　Classification of force sensors (weighing sensors): generally divided into two types: S-type force sensors (weighing sensors) and spoke type force sensors (weighing sensors)

　　The characteristic of S-type load cell (weighing sensor) is that the elastic body of the sensor adopts a shear or bending cantilever beam structure, with one end fixed and one section subjected to force, low external height, high structural strength, and can be used for bearing and measuring various tensile and compressive forces. It has the characteristics of dust-proof sealing, wide range of measurement, high precision, stable and reliable performance, and easy installation and use. Suitable for industrial automation measurement and control systems for various force and weight measurements such as electronic scales and scales.

　　The characteristics of the spoke type load cell (weighing sensor) are: its elastic body adopts a short and high shear beam, with excellent rigidity, strong resistance to lateral forces, and overload self-locking in the structure. Rubber sealing and welding sealing are used for protection, achieving IP67 and IP68 respectively. Therefore, they are widely used in equipment such as truck scales, track scales, force measuring machines, and suspension scales

　　In order to ensure the accuracy of weighing and force sensors, there are still some issues that need to be noted during installation and use. When installing and using weighing and force sensors, attention should be paid to the following details to ensure the measurement accuracy and service life of the sensors.

　　The company mainly produces and sells weighing sensors and force sensors. Various customized non-standard sensors, large tonnage force sensors, column type load sensors with a large range of 10 to 2000 tons, spoke type load sensors with a tensile and compressive force of 1 to 1000 tons, cylinder type load sensors with a tensile and compressive force of 100 to 500 tons, matched with high-precision standard force measuring instruments, and specialized digital displays for force measurement with 1 to 20 channels. Welcome to inquire by phone

AfterSalesService :

• Hydraulic press force sensor 650t