Box type weighing sensor 150kg B6E-C3-150KG-2B-S1

Description :

　　Box type weighing sensor 150kg B6E-C3-150KG-2B-S1 Detailed introduction:

　　The output signal readout circuit of the weighing sensor should not be placed in the same box as equipment that can cause strong interference or equipment that generates considerable heat. If this cannot be ensured, it is necessary to consider setting up a barrier between them and installing an electric fan inside the box All wires leading to or from the display circuit should use shielded cables

　　Three sensors are connected in full parallel, and the sensors themselves are in a 4-wire system, but they are replaced with a 6-wire system in the junction box The electronic circuit used to measure the output signal of the weighing sensor should be equipped with an independent power transformer as much as possible, and should not share the same main power supply with equipment such as contactors The signal cable of the weighing sensor is not suitable for parallel placement of strong power lines or control lines If it is necessary to place them in parallel, the distance between them should be kept at least 50cm, and the signal lines should be covered with metal tubes

　　In any case, the power and control wires should be twisted together at a speed of 50 revolutions per meter. If the weighing sensor signal wire needs to be extended, a specially sealed cable junction box should be selected

　　If this type of junction box is not necessary and cables are directly connected, special attention should be paid to sealing and moisture resistance. After connection, the insulation resistance should be checked and meet the specifications (2000~5000M). If necessary, the sensor should be calibrated from scratch If the signal cable is very long and high measurement accuracy needs to be ensured, consideration should be given to using a cable compensation circuit with a relay amplifier

　　AVIC Manufacturing Sensor L6C-C3-20kg-2B; Sensor L6C-C3-30kg-2B; L6C-C3-50kg-2B

　　Single point weighing sensor L6C-5kg; L6C-8kg； L6C-10kg； L6C-20kg； L6C-30kg； L6C-50kg；

　　Single point sensor L6E-C3-50kg-2B; L6E-C3-60kg-2B； L6E-C3-80kg-2B； L6E-C3-100kg-2B；

　　Aluminum alloy material sensor L6E-C3-150kg-2B L6E-C3-200kg-2B; L6E-C3-300kg-2B

　　Inventory sensor L6E-50kg; L6E-60kg； L6E-80kg； L6E-100kg； L6E-200kg

　　Box type weighing sensor 150kg B6E-C3-150KG-2B-S1 picture

AfterSalesService :

• Box type weighing sensor 150kg