BSA-50MT2 weighing sensor 20kN standard load cell

Description :

　　BSA-50MT2 weighing sensor 20kN standard force sensor detailed description: YOLO LOAD CELL, a brand of Youzhongli in Shenzhen. A well-known brand in the sensor industry. Main research and development, sales of standard force measuring instruments, various large tonnage load measuring sensors, tension and pressure sensors, column standard force measuring sensors, spoke load sensors, multi-channel standard force measuring instruments. The sensor has good accuracy, stability, and fast response. It is commonly used for force measurement of various force measuring equipment, laboratory standard force calibration, and third-party calibration for standard force measurement.

　　S-type sensor

　　--Certified by NETP, CMC, and PA

　　--Alloy steel material

　　--Easy to install, fast, stable and reliable

　　--Suitable for material testing machines, batching scales, mixing plants, belt scales, packaging scales, etc

　　--Range: 100 kg、 200kg、 250kg、500kg、 750kg、 1000kg、 1500kg、2000kg、 2500kg、 500kg、 10000kg、

　　This force measuring instrument and sensor can form a standard load measuring instrument ranging from 0.1 to 0.3 levels. The reference power supply of the standard load dynamometer is taken from the excitation power supply of the sensor, effectively solving the problems of zero drift caused by sensors and amplifiers and errors caused by unstable power supply. The standard force gauge has the ability to perform multi-stage linear correction on the full range of sensors, such as 10%, 20%, 40%, 60%, 80%, 100%, etc., which improves the measurement accuracy of the system. And it has the characteristics of simple operation, convenient use, calibration, and strong universality.

　　JJF1469-2014 (Calibration Specification for Strain Gauge Sensor Measuring Instruments), JJG144-2007 (Verification Regulations for Standard Force Measuring Instruments),

　　JJG557-2011 (Standard Torque Meter Verification Regulations), JJG391-2009 (Load Sensor Verification Regulations),

　　OIML-R60 (International Organization for Legal Metrology Technical Standard for Weighing Sensors)

　　Input signal range: 1.0~4.0mV/V

　　Optional channel specifications: 6/24/40

　　Rated display division: 300000

　　AD conversion rate: 50 times/second

　　Repeatability and linearity: 0.005% FS

　　MV/V accuracy: 0.02% FS

　　Communication printing interface: RS232

　　Power supply specification: 220V-50Hz

　　The tensioning equipment of the 300 ton and 500 ton standard force measuring instrument for tensioning hydraulic pressure calibration is a specialized device for tensioning prestressed anchor rods and establishing prestress. It mainly consists of a jack, a high-pressure oil pump, and sometimes includes a pressure sensor for measuring tension and a dial gauge for measuring anchor head displacement. During tensioning, instruments are required to measure the tensile force acting on the prestressed reinforcement of the anchor rod. Normally, a calibrated oil pressure gauge is sufficient, but measuring with a dynamometer is more accurate and reliable.

　　BSA-50MT2 weighing sensor 20kN standard load cell image

AfterSalesService :

• BSA-50MT2