Single point weighing sensor 500kg JXH-4 junction box
Category:
electron/Sensors, sensitive components/force sensor
Model:
Single point weighing sensor 500kg JXH-4 junction box
Brand:
Youzhongli
Retail Price
120.00USD
重量
kg
- Product Description
-
Description :
Single point weighing sensor 500kg JXH-4 junction box
A weighing sensor is a commonly used weighing instrument that can convert the gravity of the object being measured into a measurable output signal in a certain proportion. It is widely used in industries such as electronics, power, and machinery. There are many issues that users need to pay attention to when installing weighing sensors. Below, the editor will specifically introduce some key points for installing weighing sensors, hoping to help everyone.
Key points for installing weighing sensors
1. Weighing sensors should be handled with care, especially for small capacity sensors that use alloy aluminum materials as elastomers. Any impact or drop caused by vibration is likely to cause significant output errors.
2. When designing the loading device and installing it, it should be ensured that the loading force acts on the axis of the weighing sensor, so as to minimize the effects of tilting and eccentric loads.
3. In terms of horizontal adjustment. If a weighing sensor is used, the installation plane of its base should be adjusted with a spirit level until it is level; If multiple sensors are measuring simultaneously, the mounting surfaces of their bases should be kept as horizontal as possible to ensure that the force borne by each sensor is basically the same.
4. Determine the rated load of the sensor used by selecting the range of the weighing sensor according to its instructions.
5. To prevent chemical corrosion It is advisable to apply Vaseline to the outer surface of the weighing sensor during installation. The use of the platform should avoid direct sunlight and sudden changes in environmental temperature.
6. Add a bypass device made of copper braided wire at both ends of the load cell loading device.
7. The cable should not be lengthened by itself. If it is necessary to lengthen, it should be soldered at the joint and sealed with moisture-proof sealant.
Single point weighing sensor 500kg JXH-4 junction box
AfterSalesService :
Key words:- Single point weighing sensor 500kg
