Shenzhen S-type sensor MS-2-0.1T hook weighing sensor 100kg

Description :

　　Shenzhen S-type sensor MS-2-0.1T hook weighing sensor 100kg Introduction:

　　MS-2 steel "S" type weighing sensor can withstand both tensile and compressive external forces, with good output symmetry, easy installation, and complete specifications. Can be used for manufacturing electromechanical combination scales, hook dropping scales, hopper scales, various specialized scales, process scales, etc

　　range Capacity5/10/15/20/25/50/75/100/150/200/250/300/500KG，1/1.5/2/2.5/3/5/7.5/10/15/20t

　　Sensitivity Sensitivity V/V 2.0 ± 0.005 Insulation resistance Ω≥ 5000

　　Nonlinear% F.S. ± 0.02 Recommended excitation voltage Ratedexcitation (DC/AC) 5-12V

　　Repeatability% F.S. 0.05 excitation voltage Maximum excitation (DC/AC) 15V

　　Hysteresis% F.S. ± 0.05 working temperature range Safetemp.range ℃ -30~+80

　　Creep Crddp (30min)% F.S ± 0.05 Temperature compensation range Temp compensated ℃ -10~+40

　　Zero point temperature drift Temp. espresso% F.S/10 ℃ ≤ 0.025 Safe overload% F.S. 120

　　Sensitivity temperature drift Temp. interactonout% F.S/10 ℃ ≤ 0.025 Ultimate overload% F.S. 150

　　Zero output Zerooutput% FS ± 1 Protection class IP65~67

　　Input impedance Ω 380 ± 30 Cable length Cablelength 3m

　　Output impedance Ω 350 ± 3 Wires: Red wire: EXC+, Black wire: EXC -, Green wire: SIG+, White wire: SIG -

　　Shenzhen S-type sensor MS-2-0.1T hook weighing sensor 100kg picture:

　　Selection of Sensor Quantity and Range

　　The selection of the number of sensors is based on the purpose of the electronic scale and the number of points that the scale body needs to support (the number of support points should be determined according to the principle of making the geometric center of gravity of the scale body coincide with the actual center of gravity).

　　The selection of sensor range can be determined based on a comprehensive evaluation of factors such as the weighing value of the scale, the number of sensors selected, the weight of the scale body, possible bias and dynamic loads. Based on experience, sensors should generally operate within 30% to 70% of their range. However, for scales with significant impact forces, when selecting sensors, they should generally operate within 20% to 30% of their range to ensure their safe use and lifespan

　　Selection of Accuracy

　　Accuracy is an important performance indicator of sensors, which is a crucial link related to the measurement accuracy of the entire measurement system. The higher the accuracy of the sensor, the more expensive its price is. Therefore, the accuracy of the sensor only needs to meet the accuracy requirements of the entire measurement system, and there is no need to choose it too high. In this way, cheaper and simpler sensors can be selected among many sensors that meet the same measurement purpose. If the measurement purpose is qualitative analysis, sensors with high repeatability accuracy should be selected, and sensors with high measurement accuracy should not be used; If it is necessary to obtain measurement values for quantitative analysis, choose a sensor pressure transmitter with an accuracy level that meets the requirements.

AfterSalesService :

• Hook weighing sensor 100kg