20t torque sensor 200kN standard force gauge 200t oil press force sensor

Description :

　　20t torque sensor 200kN standard force gauge 200t oil press force sensor：

　　It can meet the measurement range of 1t to 150t.

　　--Alloy steel material, fully sealed welding, oil resistant, waterproof, and resistant to general corrosive gases and media/suitable for various environments.

　　--Plate ring structure/suitable for electronic weighing and force measuring equipment such as electronic car scales, inspection lines, hopper scales, etc. It can also be used as a standard sensor.

　　feature

　　--High precision

　　--Stainless steel material

　　--Easy installation and reliable performance

　　--The BM24R weighing sensor adopts a torsion ring structure

　　--Suitable for various types of force measuring equipment, platform scales, and dynamic weighing systems

　　Sensitivity: 2.0 ± 0.002mV/V

　　Recommended excitation voltage: 10~12VDC

　　Maximum excitation voltage: 15VDC

　　Safe and explosion-proof products can be used in harsh environments and hazardous situations.

　　20t torque sensor 200kN standard force gauge 200t oil press force sensor:

　　1、 The principle of a spoke type force sensor is called a spoke type sensor because its shape resembles a wheel with spokes. Because its basic principle is to measure shear stress, it is also called a shear stress sensor. Due to its low height, it is also known as a low profile load cell in foreign countries. The outstanding advantages of this sensor include low height, high accuracy, good linearity, strong resistance to eccentric loads and lateral forces. It can be used to measure both pressure and tension, making it particularly suitable for weighing and force measurement.

　　2、 The main principles of structural design for spoke type force sensors

　　1. It should have good rigidity. In order to maintain the stable working state of the sensor and reduce the influence of external vibration interference, the elastic displacement of the elastic body under load should be reduced as much as possible, so that it has a higher natural frequency.

　　2. There should be a simple and reasonable overall structure. The elastomer should be as a whole as possible, avoiding modular structures. Reduce the impact of factors such as loose fasteners and welding deformation, and facilitate the simplification of processing technology and cost reduction.

　　3. Not sensitive to changes in the position of the applied force and the influence of interference forces. The stress distribution in the strain sensitive zone of elastomers is expected to only vary with the magnitude of the applied force.

　　4. The process performance of the elastomer working area is good, including good mechanical processing, bonding, and sealing installation processes.

　　5. It has a low profile structure, easy installation, and good interchangeability. A low profile structure can enhance the ability to resist lateral forces and stabilize the working state.

　　The spoke type high-precision force sensor can be equipped with signal amplifiers, display instruments, and digital weighing controllers for PLC data acquisition

　　Spoke type force sensor

　　1. The main features of spoke type force sensors, high-precision weighing sensors, and press fit machine force sensors are:

　　(1) Wheel spoke structure with 8 fixed countersunk mounting holes to ensure small installation errors. The other end is connected to the load-bearing surface with internal threads for easy installation. The outlet end is fixed and sealed with waterproof fastening threads, IP66；

　　(2) Stainless steel material, surface polished with oxide layer, corrosion-resistant, long service life under normal conditions;

　　(3) Wide range of measurement, high precision compared to similar products, good repeatability, made of stainless steel material.

AfterSalesService :

• 20t torque sensor