Processing and connection of air distribution branch pipe and aeration disc stainless steel pipe

Description :

　　Processing and connection of air distribution branch pipe and aeration disc stainless steel pipe

　　A flange should be installed on the air distribution branch pipe to facilitate the use of air to blow away debris inside the pipe during debugging and maintenance. At the end of the main air distribution pipe, an air distributor is also installed, which uses compressed air to ensure uniform distribution of air volume in the aeration system and long-term normal operation, reducing resistance and the possibility of scaling in the air distribution pipeline.

　　During installation, the intake pipe on the pool is leveled, and the air distributor is located at the bottom of the pool according to the design requirements. The air distribution branch pipe can be raised or lowered freely within a certain range, ensuring the horizontal installation of the air distribution branch pipe. Installing the pipeline on the possibly uneven bottom ground of the pool will no longer be difficult.

　　The air pipes inside the pool should be made of stainless steel or galvanized pipes, and the air branch pipes connected to the microporous aerator can be prefabricated in the factory and transported to the construction site.

　　Our factory can produce and process various types of stainless steel cloth air branch pipes. Welcome to inquire and negotiate by phone.

AfterSalesService :

• Air distribution branch pipe