Shanxi Shuanghong Modified Epoxy Resin Waterproof and Anti corrosion Coating Epoxy Resin Anti corrosion Coating

Description :

　　Details of Modified Epoxy Resin Waterproof and Anti Corrosion Coating:

　　Modified epoxy resin waterproof and anti-corrosion coating is designed for different types of concrete structures, steel structures, steel pipe water and drainage pipelines, concrete water and drainage pipelines, steel structure containers, etc., and is suitable for the protection of highly corrosive concrete and steel structures. Compliant with the requirements of industrial building anti-corrosion standards, non-toxic and pollution-free, high elasticity, high corrosion resistance, concrete structure crack resistance and impermeability, can be applied on both dry and wet surfaces of concrete. The coating after construction is flexible and can resist leakage corrosion caused by micro cracks in concrete. It is easy to apply and has strong adhesion. The various performance indicators of this material fully meet the requirements of the anti-corrosion technical specifications for industrial buildings.

　　 Product characteristics of modified epoxy resin waterproof and anti-corrosion coating

　　1. Resistant to strong acids, alkalis, salts, industrial wastewater, domestic wastewater, seawater, solvents, etc.

　　2. Excellent aging resistance

　　3. Good resistance to microbial fungi

　　4. Non toxic, harmless, and pollution-free.

　　5. Construction can be carried out on both dry and wet substrates.

　　6. High bonding strength.

　　7. After 28 days of carbonation test on concrete protected by modified epoxy resin waterproof and anti-corrosion coating, the carbonation depth was zero.

　　8. Strong resistance to ozone corrosion.

　　Scope and conditions of application

　　Modified epoxy resin waterproof and anti-corrosion coatings are mainly suitable for anti-corrosion in industrial highly corrosive sewage treatment plants, as well as for anti-corrosion in non-toxic environments such as biotechnology, pharmaceuticals, coal chemical industry, petrochemical industry, papermaking, chemical fiber, natural gas, etc., and for anti-corrosion protection of concrete and steel structures and water pipelines. It is also suitable for anti-corrosion of the inner wall of the cooling tower in power plants, and anti-corrosion of concrete structures in garbage landfills.

　　Construction Operation Regulations

　　The characteristic is that there are no special requirements for the shape, location, and type of base layer. It has strong applicability and is suitable for various steel and concrete structure base layers. Its construction operation can be summarized into the following three stages.

　　（1） Grassroots preparation

　　A: Concrete structure

　　1. The base layer requires flatness, surface compaction and smoothing, no sharp edges, no honeycomb or rough surface, and no bulging cracks. Otherwise, it must be treated to meet the above requirements.

　　2. Surface construction waste and floating ash must be thoroughly removed.

　　3. There should be no visible water at the grassroots level, otherwise it should be removed and cleaned thoroughly.

　　B: Steel structure

　　1. The steel structure requires the rust removal of the steel surface to reach Sa2.5 level.

　　2. Directly spray E to meet the design thickness requirements (without primer or intermediate coating).

　　（2） Material usage

　　Before use, it should be stirred evenly, and mechanical spraying can be used for anti-corrosion construction.

　　1. The modified epoxy resin waterproof and anti-corrosion coating is a two-component coating, which should be stirred evenly before use (stirring time should not be less than 10 minutes)

　　2. After each mixing, clean the mixing bucket, mixing blades, and other utensils and equipment with clean water in a timely manner, otherwise it will affect the quality of the next mixing.

　　（3） Coating construction

　　EMA elastic epoxy modified anti-corrosion coating can be mechanically sprayed or manually applied.

　　1. Mechanical spraying

　　Using high-pressure spraying equipment and a 220V single-phase motor, the equipment weighs only 120 kilograms. A construction team of three people can complete more than 2000-3000 square meters per shift.

　　2. Manual painting

　　Use a long board brush or circular rolling brush with a thickness of 150mm to 200mm or more for painting. Brushing should be done horizontally and vertically in a cross pattern to achieve a flat, uniform, and consistent thickness.

　　（4） Thickness requirements

　　The dry film thickness after construction shall not be less than 1mm.

　　（5） The desired effect after construction

　　After the construction is completed, the coating color is uniform, there is no leakage or bottoming phenomenon, the thickness is uniform, and there are no pinholes, cracks, bubbles or other phenomena on the surface.

　　Precautions

　　1. This product should be stored in a cool and dry place to prevent exposure to sunlight and freezing.

　　2. The effective storage period is six months, and the storage temperature is above 0 ℃ and below 45 ℃.

AfterSalesService :

• Modified epoxy resin waterproof and anti-corrosion coating