Heilongjiang Shuanghong second-order reactive waterproof coating exceeds the national standard shear strength

Description :

　　1、 Product Introduction

　　AMP-100 second-order reactive waterproof coating is a revolutionary waterproof coating that has been widely used in road and bridge waterproofing projects nationwide due to its excellent performance and mature technology. AMP-100 second-order reactive waterproof coating is a single component viscous liquid made by adding petroleum based reactive substances to a blend of natural asphalt and petroleum asphalt. Petroleum based reactive substances undergo copolymerization physical and chemical reactions when fully exposed to reactive gases such as O2 and SO2 in the air at a certain specific surface area, which is the first-order reaction stage of the product; At this stage, a certain strength of elastic adhesive material is generated, which can prevent construction vehicles and asphalt concrete paving equipment from damaging the waterproof bonding layer. During the process of laying hot asphalt concrete, the elastic gel waterproof bonding layer reacts at high temperatures, and the large aggregate is embedded in the elastic waterproof bonding layer to form shear bonds, playing a good role in bonding and shear resistance. After the paving is completed, the second-order reaction of the product is completed, forming a higher elastic-plastic waterproof bonding layer.

　　2、 Product Details

　　Product Name: Double Rainbow AMP-100 Second Stage Reaction Waterproof Coating

　　Product Model SH-104

　　Product form: single component, brown black liquid slurry

　　Execute standard JC/T975-2005

　　3、 Product advantages

　　(1) Reactive type: It has the first and second stage reaction processes of AMP-100 second-order reactive waterproof bonding material, which forms a highly elastic and plastic waterproof bonding layer after curing, and has excellent high and low temperature resistance performance;

　　(2) Excellent waterproof effect: After use, the product can play a waterproof role in stages during the first-order and second-order reaction processes.

　　(3) Curing effect: It can penetrate to a certain depth on the surface of cement concrete, fully react with alkali substances in cement concrete to form a nail effect.

　　(4) Strong bonding performance: The bonding and shear forces with cement concrete or asphalt concrete can reach over 1.0MPa, effectively preventing the occurrence of pavement delamination, displacement and other diseases.

　　(5) Construction simplicity: It can be sprayed or rolled, with simple construction, short construction period, and strong puncture resistance.

　　5、 Scope of application

　　Suitable for waterproofing projects such as highway bridges, urban overpasses, and culverts, it can prevent steel corrosion caused by water seepage on concrete bridge decks and improve the service life of beams.

　　6、 Precautions

　　1. This product is suitable for use in an environment between 5 ℃ and 35 ℃. During the construction process, it must be protected from rain, hot sunlight, and frost.

　　2. If there is precipitation, it does not affect the quality. Stir well and it can be used normally.

　　3. Material storage: High temperature exposure is strictly prohibited. If the bucket lid is opened, it should be sealed immediately after use; Pay attention to antifreeze at 0 ℃.

　　7、 Reference dosage

　　When the base surface is flat, the theoretical dosage is 1.2-1.5kg/㎡ (twice), and the specific dosage depends on the situation.

　　8、 Shelf life:

　　Under normal storage and transportation conditions, the shelf life is one year.

　　9、 Packaging specifications:

　　1. Product specifications

　　50L 100L single component slurry

　　2. Packaging materials

　　The outer packaging is in plastic drums.

AfterSalesService :

• Second order reactive waterproof coating