Fire pump single-stage fire pump vertical fire pump fire pump manufacturer ranking

Description :

　　Structural description of XBD-L vertical single-stage fire pump:

　　The XBD-L single suction single-stage fire pump consists of two parts: the motor and the pump. The fire pump and the motor are coaxial, and the structure of the fire pump includes the pump body, impeller, pump cover, mechanical seal, etc. The inlet and outlet of the pump are on the same horizontal axis and have the same diameter specifications, making loading and unloading extremely convenient and occupying a small area. The pump is equipped with an installation base for easy installation and to increase the stability of pump operation. The pump seal adopts mechanical seal, which has the characteristics of reliable sealing and no leakage. The axial force of the pump is balanced by setting a balance ring on the impeller. The inlet and outlet flanges of the pump are designed for a pressure of 1.6MPa, and the pipeline matching is convenient. The XBD-L single suction multi-stage segmented fire pump consists of a motor and a pump. The motor is a Y-shaped three-phase asynchronous motor, and the fire pump and motor are connected by a coupling. The overall connection is rigid and does not require calibration for use. The fire pump consists of a stator part and a rotor part. The stator part of the pump consists of components such as the inlet section, middle section, guide vanes, outlet section, and packing box. To prevent stator wear, the stator is equipped with sealing rings, balance sleeves, etc., which can be replaced with spare parts after wear. The rotor part consists of a shaft, a middle wheel, a balance drum, etc. The lower end of the rotor is a water lubricated bearing, and the upper part is an angular contact ball bearing. The axial force of the pump is mostly borne by the balance drum, and the remaining small residual axial downward force is borne by the angular contact ball bearing. The joint surface paper pads of the inlet section, middle section, and outlet section are sealed by tightening, and users can choose according to their needs.

　　Maintenance and upkeep of XBD single-stage fire pump during operation: 1. The inlet pipeline must be highly sealed and not leak water. leak; 2. Prohibit long-term operation of pumps under cavitation conditions; 3. Prohibit long-term operation of motor overcurrent when the pump operates under high flow conditions; 4. Regularly check the motor current value during pump operation to ensure that the pump operates within the design operating range as much as possible; 5. The pump should be supervised by a dedicated person during operation to avoid accidents; 6. After long-term operation, if the pump experiences increased noise and vibration due to mechanical wear and tear, it should be stopped for inspection. If necessary, vulnerable parts and bearings can be replaced. The maintenance period for the unit is generally one year.

　　Welcome to the ranking page of fire pump manufacturers for single-stage fire pumps, vertical fire pumps, and fire water pumps. This is provided by Shanghai Zibo Zhengji Pump Industry (Group) Co., Ltd. The contact number is [insert phone number], and the address is located in Jinhui Industrial Park, Fengxian District, Shanghai. Our main business includes water pumps, electrical control cabinets, and complete water supply equipment.

AfterSalesService :

• Fire pump manufacturer