Fire pump manufacturer vertical fire pump XBD single-stage fire pump

Description :

　　XBD-L vertical single-stage fire pump product features:

　　1. The fire pump has a compact structure, small volume, and beautiful appearance. Its vertical structure determines a small installation area, and its center of gravity is aligned with the pump foot center, thereby enhancing the pump's operational stability and service life.

　　2. The suction and discharge ports of the fire pump are both horizontal, simplifying the connection of pipelines.

　　3. Multi level can be installed as needed, with the suction and discharge ports installed in the same direction or in several different directions of 90 ° 180 ° 270 ° to meet different connection scenarios.

　　4. The pressure of the fire pump can be adjusted by increasing or decreasing the number of pump stages and cutting the outer diameter of the impeller as needed, without changing the installation footprint, which is not available in other types of pumps.

　　5. The pump rotor has a small degree of winding, smooth operation, low vibration, low noise, and long service life.

　　Installation instructions for XBD vertical fire pump:

　　1. The weight of the pipeline should not be borne on the pump during installation, otherwise it is easy to damage the pump;

　　2. The pump and motor are integrated structures that have been calibrated by the manufacturer before leaving the factory, so there is no need to adjust them during installation, making installation very convenient;

　　3. During installation, the anchor bolts must be tightened, and the pump should be checked at regular intervals to prevent loosening, in order to avoid severe vibrations that may affect the performance of the pump during start-up;

　　4. Before installing the water pump, carefully check whether there are any hard substances (such as stones, iron sand, etc.) in the pump flow channel that affect the operation of the water pump to avoid damaging the overcurrent components during the operation of the water pump;

　　5. In order to maintain and facilitate safe use, a regulating valve should be installed on the inlet and outlet pipelines of the pump, and a pressure gauge should be installed on the inlet and outlet accessories of the pump. For high lift pumps, to prevent water hammer, a check valve should also be installed in front of the outlet gate valve to cope with sudden power outages and other power loss accidents, so as to ensure the operation of the water pump under working conditions and increase the service life of the water pump;

　　6. Pumps used in suction applications should be equipped with bottom valves, and the inlet pipeline should not have too many bends. At the same time, there should be no water or air leakage to avoid affecting the suction performance of the pump;

　　7. In order to prevent impurities from entering the pump and blocking the flow channel, a filter should be installed in front of the pump inlet to affect performance;

　　8. Before installing the pipeline, rotate the rotor components of the water pump without any friction sound or jamming phenomenon. Otherwise, the pump should be disassembled to check the cause.

　　Welcome to the page of vertical fire pump manufacturer XBD single-stage fire pump, provided by Zibo Zhengji Pump Industry (Group) Co., Ltd., mainly engaged in water pumps, electrical control cabinets, and complete water supply equipment.

AfterSalesService :

• Fire pump manufacturer