Large supply of DN25 Ball Ring Packing PVDF PP Metal Material Chemical Packing

Description :

　　Large supply of DN25 Ball Ring Packing PVDF Ball Ring Metal Ball Ring Packing

　　Our company is a large-scale chemical packed tower internals enterprise in the domestic industry that integrates design and research and development, production equipment automation, installation and after-sales service, and technical guidance standardization (with 17 years of experience). It is a key supported industry for development, and its products are widely used in industries such as environmental protection, fine chemicals, petrochemicals, refining, coking, light industry metallurgy, steel plants, etc; The registered capital is 98 million yuan, fixed assets are 50 million yuan, and there are approximately 286 employees, including 26 technical personnel. We produce more than 100 products including environmental protection device fillers, ship smoke control fillers, plastic fillers, metal and ceramic fillers, tower internals, chemical equipment, etc. Especially in recent years, the business of environmental protection tower installations has been continuous, and the environmental protection tower installations that have been jointly designed and produced by our company, Hebei University of Technology, East China University of Science and Technology, Tianjin University, and Tsinghua University have been running well.

　　Pall ring productTechnical Specifications：

　　Product Application:

　　(1) Strong mass and heat transfer capabilities. The temperature difference between the air exiting the air cooling tower and the cold water entering the tower from the upper section can be less than 1 ℃, and a negative temperature difference of 4-5 ℃ can be generated between the outlet temperature of the water cooling tower and the temperature of the incoming sewage nitrogen;

　　(2) Due to the accumulation porosity reaching 94-95%, it is not easy to block and select as foam carrier, which is conducive to variable operating conditions. After increasing the air volume, it is not easy to carry water;

　　(3) Low pressure drop, with a resistance of approximately 10mm water column per meter of packing material;

　　(4) The water consumption of the air cooling tower can be reduced by 30%;

　　(5) Can reduce the cooling capacity of the chiller. In winter, it is not necessary to turn on the machine, and in summer, the cooling capacity can be reduced by 80%, making it possible to achieve an air pre cooling system without a chiller;

　　(6) Easy installation and low manufacturing cost;

　　(7) The relatively low density (0.9kg/m3) results in a lightweight final product.

　　PVDF (polyvinylidene fluoride): resistant to high and low temperature alkali, acid, salt solvents, many organic solvents such as alcohol, ketone, ester, etc, ， Almost all chemical substances, such as H2O2, have a temperature resistance of ≈ 120 ℃, a density of 0.78g/cm3, and a light yellow color.

　　Dier Chemical Packing is used to produce packing materials for petrochemical equipment and environmental protection equipment;

　　Plastic loose packing: Ball ring, stepped ring, saddle ring, conjugate ring, Rascal ring, flower wreath, polyhedral hollow ball, floating ball, plastic snowflake ring, environmentally friendly ball, alpha ring, Laru ring, three combination one packing, etc;

　　The above finished products are made of materials such as PP/PVC/CPVC/PVDF/PTFE/flame retardant materials, etc

　　Metal loose packing materials: Ball rings, stepped rings, saddle rings, conjugate rings, Raschig rings, Entrox rings, aluminum flower garlands, 84 inner arc rings, flat rings, double-layer conjugate rings, etc.

　　The above finished products are made of materials such as 304/304L/316/316L/duplex steel/urea grade stainless steel, etc

　　Ceramic bulk packing: Ball ring, stepped ring, saddle ring, conjugate ring, Rascal ring, cross partition ring, etc.

　　Regular packing: plastic/metal/ceramic orifice plate corrugated, perforated corrugated and wire mesh corrugated packing, etc.

　　Tower internals packing: trough distributor, trough distributor, tubular distributor, hump support, bubble cover tray, fog catcher, wire mesh demister, wavy wire mesh demister, grid packing, support, pressure grid, clamp, gasket, etc;

　　Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province can produce various products according to customer needs and provide a comprehensive system of design, production, and installation services; Please consult the sales department for details;

AfterSalesService :

• DN25 Ball Ring Packing