700 type metal orifice plate corrugated stainless steel 316L 304 perforated plate corrugated regular packing manufacturer

Description :

　　1) Product Description:

　　The 700 type metal orifice plate corrugated packing produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province is composed of several metal corrugated sheets arranged parallel and vertically. The corrugated sheets have small holes with a top angle of about 900 degrees, and the channels formed by the corrugations are at a 45 degree or 30 degree angle to the vertical direction. Adjacent corrugated flow channels are arranged at a 90 degree angle, and the upper and lower corrugated packing plates are stacked by rotating 90 degrees. In the tower with a smaller diameter connected by flanges, the corrugated packing plates are made into whole disks with a diameter slightly smaller than the inner diameter of the tower. In the tower with a larger diameter, each plate of corrugated packing is divided into several pieces and placed into the tower through a manhole. Inside the tower, they are assembled into complete disks. The corrugated sheets of the upper and lower plates of packing are rotated 90 degrees to install them, allowing the fluid to mix thoroughly inside the tower.

　　2) Product Performance Introduction:

　　The 250Y metal orifice plate corrugated packing produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province is made by stamping various metal thin plates with a thickness of 0.15-0.20mm. The plate is punched with small holes of diameter 4mm and several fine seams about 5mm long, which enhances the wetting performance and may form bidirectional permeation. The opening rate is about 9-12%. The perforated plate surface has a special texture to improve the effective mass transfer area. Its separation ability is similar to that of wire mesh corrugated packing, but its anti blocking ability is stronger than that of corrugated packing.

　　3) Product application:

　　The 250Y metal orifice plate corrugated packing produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province is mainly used in the petrochemical industry, fertilizer industry, natural gas purification, smelting, etc. Such as in coal chemical industry (washing tower for recovering crude benzene in coking plant), separation of ethylbenzene and ethylene, preparation of high-purity oxygen, separation of epichlorohydrin, de butane tower, cyclohexane recovery, gasoline distillation, atmospheric and vacuum refining and other equipment.

　　Packaging method for corrugated packing of metal orifice plate: cardboard box;

　　Transportation method of corrugated packing for metal orifice plate: truck transportation;

　　Material: PP/PVC/CPVC/PVDF/PTFE, etc;

　　Material: 304/304L/316/316L/duplex steel/titanium, etc;

　　Our company can provide various types, specifications, and materials of corrugated packing for orifice plates according to customer requirements. We can also add wall flow rings around the corrugated plates to better prevent liquid leakage.

　　Dier Chemical Packing Co., Ltd., Pingxiang City, Jiangxi ProvinceWe can produce various materials according to customer needs: Ball rings, step rings, saddle rings, conjugate rings, Rascal rings, flower garlands, multi-faceted hollow balls, floating balls, plastic snowflake ringsEnvironmental BallYingteluos, orifice plate corrugated packing, wire mesh corrugated packing and tower internals, trough distributor, gas-liquid distributor, wire mesh demister, hump support, packing grid pressure grid, float valve tray, bubble cover tray, etc

　　 Dier Chemical Packing Co., Ltd., Pingxiang City, Jiangxi ProvinceWe can produce various products according to customer needs and provide a comprehensive system of design, production, and installation services; Please consult the sales department for details;

　　We will exchange your utmost trust and satisfaction with the most reasonable prices and the best service quality.

AfterSalesService :

• 700 type metal orifice plate ripple