Metal wire mesh demister desulfurization tower 316L wire mesh demister PP demister price

Description :

　　Metal wire mesh demister is sometimes called a wire mesh demister or wire mesh catcher. The wire mesh demister is mainly composed of a wire mesh, a wire mesh grid, a wire mesh block, and a supporting device for fixing the wire mesh block. The wire mesh is a gas-liquid filter screen made of various materials, which is composed of metal or non-metal wires. The non-metallic wire of the gas-liquid filter screen is made by twisting multiple strands of non-metallic fibers, or it can be a single strand non-metallic wire. It is a typical product in inertial collision demisters. The PP wire mesh demister has the characteristics of high demisting efficiency, simple structure, and low resistance. It is mainly used to separate the mist carried by gas in the tower to ensure mass transfer efficiency, reduce the loss of valuable materials, and improve the operation of the compressor after the tower. PP wire mesh demisters are generally installed at the top of the tower. If wire mesh demisters are installed between the trays, it can not only ensure the mass transfer efficiency of the trays, but also reduce the spacing between the plates. It is widely used in fields such as desulfurization, oil mist removal, removal of toxic industrial gases and odors. This PP wire mesh demister can not only filter out larger liquid droplets suspended in the airflow, but also filter out smaller and smaller liquid droplets, and is widely used in gas-liquid separation devices in industries such as chemical, petroleum, tower manufacturing, and pressure vessels.

　　Stainless steel wire mesh demister

　　Characteristics of stainless steel wire mesh:

　　Good acid resistance, alkali resistance, and corrosion resistance;

　　High strength, strong tensile strength, toughness, and wear resistance [1], durable and long-lasting;

　　Resistant to high temperature oxidation, the nominal temperature tolerance of 304 stainless steel mesh is 800 degrees Celsius, and the nominal temperature tolerance of 310S stainless steel mesh can reach 1150 degrees Celsius;

　　Room temperature processing, which is easy to plastic process, diversifies the possibilities of using stainless steel mesh screens;

　　High smoothness, no need for surface treatment, easy and simple maintenance

　　The wire mesh demister produced by Jiangxi Pingxiang Dier Chemical Packing Co., Ltd. is made according to the customer's requirements. The small diameter is only 400MM-500MM, while the large diameter can reach 15000MM. When the diameter exceeds 1 meter, it needs to be divided into blocks according to the manhole of the tower. Installation involves sending each module into the tower through a manhole and assembling it according to the organizational chart. A certain environmental protection company in Jiangsu has established a long-term cooperation with our company since 2008, and has been purchasing desulfurization tower wire mesh demister and corrugated plate packing from our company for a long time.

AfterSalesService :

• Metal wire mesh demister