Metal orifice plate corrugated packing 316L 304 orifice plate corrugated packing 450Y 350Y 250Y 125Y

Description :

　　1) Product Description:

　　250Y produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi ProvincemetalOrifice corrugated packingIt is composed of several metal corrugated sheets arranged parallel and vertically, with small holes on the corrugated sheets. The top angle of the corrugations is about 900 degrees, and the channels formed by the corrugations are at a 45 degree or 30 degree angle to the vertical direction. Adjacent corrugated flow channels are arranged at a 90 degree angle, and the upper and lower corrugated packing plates are stacked by rotating 90 degrees. In the tower with a smaller diameter connected by flanges, the corrugated packing plates are made into whole disks with a diameter slightly smaller than the inner diameter of the tower. In the tower with a larger diameter, each plate of corrugated packing is divided into several pieces and placed into the tower through a manhole. Inside the tower, they are assembled into complete disks. The corrugated sheets of the upper and lower plates of packing are rotated 90 degrees to install them, allowing the fluid to mix thoroughly inside the tower.

　　2) Product Performance Introduction:

　　250Y produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Provincemetal mellapale packing It is made by stamping various metal thin plates with a thickness of 0.15-0.20mm. The plate is punched with small holes with a diameter of 4mm and several fine seams with a length of about 5mm, which enhances the wetting performance and may form bidirectional penetration. The opening rate is about 9-12%. The perforated plate surface has a special texture to improve the effective mass transfer area. Its separation ability is similar to that of wire mesh corrugated packing, but its anti blocking ability is stronger than that of corrugated packing.

　　3) Product Technical Parameters:

　　4) Product application:

　　The 250Y metal orifice plate corrugated packing produced by Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province is mainly used in the petrochemical industry, fertilizer industry, natural gas purification, smelting, etc. Such as in coal chemical industry (washing tower for recovering crude benzene in coking plant), separation of ethylbenzene and ethylene, preparation of high-purity oxygen, separation of epichlorohydrin, de butane tower, cyclohexane recovery, gasoline distillation, atmospheric and vacuum refining and other equipment.

　　Packaging method for corrugated packing of metal orifice plate: cardboard box;

　　Transportation method of corrugated packing for metal orifice plate: truck transportation;

　　Material: PP/PVC/CPVC/PVDF/PTFE, etc;

　　Material: 304/304L/316/316L/duplex steel/titanium, etc;

　　Dier Chemical Packing Co., Ltd. in Pingxiang City, Jiangxi Province has been engaged in research, development, and design of various tower internals products, as well as plastic, metal, ceramic bulk and regular packing materials for many years. We can produce various materials according to customer needs:

　　Our company (Jiangxi Pingxiang Dier Chemical Packing Co., Ltd.) is committed to providing customers with satisfaction and peace of mind; Our company has been signing long-term technical cooperation agreements with more than 10 domestic chemical research units for many years, and has hired senior technical management personnel from Tsinghua University and Tianjin to provide product design, processing and production, installation, and after-sales service.

AfterSalesService :

• metal mellapale packing