Baoji sells a large number of 6-ton steam boilers, while Heguo sells natural gas boilers

Description :

　　Four energy-saving methods for gas steam boilers

　　Energy conservation is an issue that needs to be considered in industrial production, especially for industrial boilers that provide thermal power support for industrial production. Energy conservation also reflects the technological level of the boiler industry. With the successive implementation of national energy conservation and environmental protection policies, traditional coal-fired industrial boilers are gradually being replaced by natural gas steam boilers, and a revolution in energy conservation and environmental protection has occurred in the field of industrial thermal power.

　　In addition to transforming traditional industrial coal-fired boilers into natural gas steam boilers, measures can also be taken to save energy during the operation of natural gas steam boilers. The editor has compiled the following energy-saving measures for natural gas steam boilers:

　　1. Reasonably select the rated power and number of natural gas steam boilers based on the amount of steam required for industrial production. The higher the matching degree between these two situations and actual use, the smaller the exhaust loss and the more obvious the energy saving.

　　2. Adequate contact between fuel and air: Burning an appropriate amount of fuel and air in a suitable proportion can improve the combustion efficiency of the fuel and reduce the emission of pollutants, achieving the dual goal of energy conservation.

　　3. Lowering the exhaust temperature of natural gas steam boilers: Lowering the exhaust temperature of boilers effectively utilizes the waste heat generated in the exhaust. The efficiency of commonly used boilers is 85-88%, and the exhaust temperature is 220-230 ℃. If energy-saving devices are installed to utilize exhaust heat, the exhaust temperature can be reduced to 140-150 ℃, and the boiler efficiency can be increased to 90-93%.

　　4. Recycling and reusing the heat from boiler wastewater: By utilizing the heat from continuous wastewater through heat exchange, the feedwater temperature of the de itch water is increased to achieve the energy-saving goal of natural gas steam boilers.

　　At the same time, energy-saving measures for natural gas steam boilers can also reasonably recover the condensed water in the heating system and recycle the heat of these condensed water.

AfterSalesService :

• steam boiler