Shandong natural gas thermal oil boiler price 600000 kcal thermal oil boiler manufacturer

Description :

　　What should be prepared before igniting a thermal oil boiler (Part 1)

　　Before igniting the heat transfer oil boiler, it must undergo strict inspection before it can be put into production and use with confidence. If any problems arise during the inspection process, they should be resolved in a timely manner. Let's take a look at what should be prepared before igniting the heat transfer oil boiler?

　　1、 Inspection and preparation of internal and external heat transfer oil boilers

　　1. The residual water inside the heat transfer oil boiler has been drained and dried

　　2. Clean up the impurities inside the furnace; All inspection holes, manholes, etc. have been sealed and filled with materials that meet the requirements of the heat carrier furnace medium.

　　2、 Inspection of safety accessories and protective devices:

　　1. The combustion ventilation equipment was inspected and found to be normal.

　　2. The needle valve or globe valve at the front end of the pressure gauge bend is fully open. The accuracy, range, and dial diameter of the pressure gauge meet the requirements, and the pointer returns to zero when there is no pressure.

　　3. The thermometer and automatic recording instrument have been verified and qualified; The over temperature and over pressure alarm and automatic interlock protection device have been put into operation, and there are no abnormalities in the electrical control contacts.

　　4. The valve of the liquid level gauge drain pipe is closed, and the drain pipe has been correctly connected to the storage tank.

AfterSalesService :

• Price of Shandong natural gas thermal oil boiler