50 cubic meter liquid ammonia storage tank price in the chemical industry, supplied by liquid ammonia storage tank manufacturers

Description :

　　liquid ammoniaA storage tank is a highly vacuum refrigerated container. So, how to extend the service life of liquid ammonia storage tanks during their use? Below, the editor will share with you how to extend the service life of liquid ammonia storage tanks.

　　Before use, a small amount of liquid ammonia should be injected to pre cool it. When the temperature inside the tank reaches the liquid ammonia temperature, the tank should be filled with liquid ammonia until it is full.

　　Secondly, the liquid ammonia storage tank should be handled with care to prevent collision and compression. When moving, it should not be dragged on the ground and should be lifted. It should be stored in a dry and well ventilated room to prevent moisture.

　　Thirdly, it is necessary to check the neck plug and neck plug groove at any time, remove the ice on the neck plug in a timely manner, and do not place plastic cloth or other substances on the neck plug to increase the sealing effect and ensure the functionality of the liquid ammonia storage tank.

　　Fourthly, when it is found that the consumption rate of liquid ammonia is too fast or there are water droplets or white frost near the neck of the liquid ammonia storage tank, it indicates that the insulation function of the tank is malfunctioning and liquid ammonia cannot be retained. The specimens placed in the liquid ammonia storage tank should be properly labeled, and the retrieval and placement should be stable, accurate, and fast.

　　Fifth, the inner cavity of the liquid ammonia storage tank should be cleaned once a year to prevent erosion of the tank wall. Before cleaning, the liquid ammonia in the tank should be drained and left indoors for 2-3 days to preheat to room temperature. Then, it should be washed with neutral laundry detergent and rinsed clean with clean water to control dryness. The temperature of the cleaning solution and clean water should not exceed 40 ℃ to prevent overheating from affecting the function of the tank.

　　Sixth, the number of transportation and opening of the liquid ammonia storage tank should be minimized as much as possible. If transportation is required, it must be fixed to the truck box with ropes, kept upright, and careful not to fall, overturn, or lie horizontally, to prevent severe vibration as much as possible.

AfterSalesService :

• 50 cubic meters of liquid ammonia storage tank