Precautions for after-sales installation of Zhongjie 60 cubic liquefied gas storage tank manufacturer contracting

Description :

　　During the processingLPG storage tankPrying and settling, LPG storage tanks inevitably require a good external welded plastic liner. Some people believe that the anti slip stainless steel shell of LPG storage tanks cannot be welded. Everyone is also free to weld LPG storage tanks when prying and installing them. In our opinion, both of these statements are incorrect. The answer is that it can be welded, but welding is combined to accurately measure.

　　1. The dismantling of LPG storage tanks can only be achieved through welding measures to ensure that the welding and plastic lining of the tank body are not affected. Preparation measures for LPG storage tank pry: Find a relatively large guide empty bottle of 2.5L, with a drill bit diameter of 3-4mm on the lid, and fill it with tap water. The electrode should be less than 4 millimeters, and intermittent welding is used.

　　2. Try to find a welding current suitable for the dismantling of LPG storage tanks (not too much current).

　　3. After adjusting the welding current. Now spray paint several times and wash with water until each weld seam is completely cooled by 20100mm.

　　4. Perform the second welding. Secondly, thirdly Operate the same and repeat the operation.

　　5. The process of dismantling and welding LPG storage tanks will require patience and fast welding speed. The primary weld seam should be short, and when spraying water, the water should be large and the cooling time should be long. With the gradual expansion of the production process in related industries, there is an inexhaustible demand for large-scale mass production in many industries, which has become the main means for enterprises to retain requirements. Large scale production of LPG skids can bring more benefits.

　　With the rapid growth of the economy and the increasing richness of science and technology, the introduction of advanced technology and processes has led to the widespread use of LPG tank dismantling in various industries and prevention of various storage media. In order to meet the different needs of customers, the design of LPG tank dismantling can also be customized according to their requirements.

　　The above is an analysis of various situations regarding whether the outer shell of the LPG storage tank can be welded. Overall, it still needs to be determined based on the actual situation.

AfterSalesService :

• 60 cubic meter liquefied gas storage tank