Zhongjie Equipment supplies 10 ton gas boilers at a price of 10 ton gas steam boilers for large-scale sales
Category:
mechanical equipment/Industrial boilers and accessories/Gas boiler
Model:
WNS10-1.25
Brand:
Zhongjie Special Equipment
Retail Price
652,000.00USD
重量
kg
- Product Description
-
Description :
Common faults and solutions of gas boiler burners
Fault phenomenon cause of failure exclusion method Shutdown after flame formation 13. Flame formation, but shutdown under rated load operation (1) Filter contaminated (2) Pressure regulating valve working due to inertia (3) Gas meter malfunction or deep pipeline water accumulation (1) Clean the filter (2), inspect the oil suction nozzle (3), and notify the gas management agency Flame monitoring failure during power process 14. The burner motor is running, ignition can be heard, and the flame formation is normal, but then the machine stops due to a malfunction (1) Unstable ionization current, too low (2) uneven adjustment of gas air mixture (3) ignition spark affecting ionization current (1) Change the position of the ionization electrode; Eliminate high environmental resistance in the ionization circuit and terminals (tighten the terminals) (2) readjust (re adjust) (3) replace the phase and neutral wires of the ignition transformer primary coil 15. Flame sensor (1) The ultraviolet probe is contaminated (2) the brightness is too weak (3) the ultraviolet probe fails (1) Cleaning (degreasing) (2) detecting combustion regulation air and gas volume (3) replacement pump 16. Not transporting oil (1) Pump failure (2) Decrease in oil delivery pressure and power (3) Inlet valve not sealed (4) Inlet oil pipe not sealed (5) Cut off valve closed (6) Filter contaminated (7) Filter not sealed (8) Oil pipe not sealed (9) Pump suction air (10) High vacuum degree in oil pipe (1) Replace (2) Replace pump (3) Remove inlet valve for cleaning or replacement (4) Seal inlet pipe (5) Open (6) Clean (7) Replace sealing ring (8) Tighten, exhaust (9) Tighten, exhaust (10) Clean filter and valve nozzle 17. Uneven atomization (1) The nozzle is contaminated or worn (1) Clean the nozzle or update it 
AfterSalesService :
Key words:- gas boiler
More Products
