Anhui hard mixed wood square solid mixed wood board, locust tree wood square exhibition road wood square wholesale wood processing factory

Description :

　　During the use of Anhui hardwoods, we know that the moisture content is related to the dryness of Flat noodles. As long as the water content is sufficient, fractures and foot deformities will not occur. Therefore, grasping the essentials of dehydration protection is often crucial

　　1. The influence of temperature: The higher the temperature, the easier it is for the colloids between wood fibers to soften, resulting in a reduction in compressive strength. Exposure to high temperatures can cause the original condition of the wood used for construction to deform, crack, or mold, thus keeping the wood warm to prevent storage at higher temperatures.

　　2. Moisture content: When the moisture content is less than the fiber saturation surface, the strength of the wood increases, thereby improving the compressive strength against bending and slippery grains, but the effect on the tensile strength of smooth grains is relatively small Above the fiber saturation surface, the strength is essentially a constant value, so the less water there is, the greater the strength and the better the quality of the square wood.

　　3. When building a wooden warehouse, it should be dry at first, then covered with moisture-proof film, coated with oil and water, and painted to avoid being affected by the internal weather;

　　Four. Regularly open windows to dissipate moisture inside the house, but pay attention to prolonged exposure to sunlight, as this can lead to changes.

　　expand:

　　Teach you how to test the moisture content of the construction

　　Huai'an hard mixed wood has a dry moisture content between 8 and 12, and will not show signs of warping or warping. From the dry moisture content of wood. Today, there are two types of dryness in wood: mechanical and natural. Steam dryness is good, the wood will be completely dry, and the material will remain unchanged. Natural wood cracks. Secondly, in the environment of the instrument, simple and lightweight tools can be used to detect the moisture content of the construction.

　　Main points/pace

　　(1) Hand weighing method

　　Silent wooden blocks, wood with low moisture content will be lighter in weight, while larger water wood will be heavier.

　　(2) Hand touch technique

　　Place your palm flat on the wooden surface and feel the infection.

　　(3) Nail tapping method

　　Use long nails to knock hard miscellaneous wood. Wood that is very dry is difficult to put out, while wood with high humidity is difficult to put out.

　　Precautions

　　The square wood used in the hardwood square room should be turned over from time to time to create the atmosphere of the room and the outdoors. The wood in the room is also afraid of getting dirty, leaving some water-soluble dirt in the room. There are also some orange peel water that can be used to wipe away dirt, but it is difficult to remove dirt, such as chewing gum and paint. We cannot rush to clean it, and ordinary cleaning agents will not be lost. Therefore, it is not easy to use a cutting machine or hard assembly to eliminate dirt and handle it in real time;

　　Outdoors, square wood is becoming increasingly waterproof. Square wood is afraid of water, so during the rainy season, it is important to avoid a pool of clean water to prevent cracking, decay, deformation, paint peeling, and shine. What is hardwood? Hardwood is a general term for a type of wood with high density and hardness, such as oak, ash, ash, birch, elm, jujube, etc. Domestically produced oak, water chestnut, waxwood, birch, elm, jujube, all belong to hard mixed wood.

AfterSalesService :

• Hard mixed wood square