Pine board mold inhibitor, efficient and stable tray material, mold removal and corrosion prevention without harming hands

Description :

　　Wood mold inhibitorMainly antifungal agents are polymer material additives that inhibit mold growth and kill mold. It can protect polymer materials from fungal invasion and maintain good appearance and physical and mechanical properties. After years of development and improvement, antifungal agents have been expanded to meet the anti mold risks of different users and products, such as coating anti mold agents, wood anti mold agents, anti-corrosion anti mold agents, leather anti mold agents, etc. However, we do not know the proportion of other anti mold agents added and how to use them. Let's take a look at the editor below.

　　Addition method: Different raw materials, dosages, and ratios result in different anti mold models.

　　It is to directly add a certain proportion of mold inhibitor to the material or product. Firstly, the mold repellent must be compatible with the raw materials, and can also be added in the middle of the process, or even in the finished product. Powder can be added, or the formulation can be added after dissolving in water or other organic solvents. The commonly used products mainly include food, beverages, adhesives, oil films, etc.

　　Immersion method: generally used for large volume, large area, and non permeable materials themselves.

　　Soak the material or product in a mixture of mold inhibitors for a period of time, then let it air dry naturally, or if necessary, dry it. At this point, the material is adsorbed into a certain amount of antifungal agent. (Material size, material itself, anti mold effect), it is necessary to master the soaking time and temperature.

　　Smearing and spraying: The tools used are completely different.

　　Using brush tools to dye, the uniform external surface can involve the mildew inhibitor absorbed inside the material product, and the coating method is to waste the dosage of the mildew inhibitor and the product surface can not be evenly applied, but the use of spray in the sprinkler can be evenly sprayed, with less use, and the fog is not easy to be too large. Usually, these two methods are roughly related to products, such as leather products, faster absorption of textiles, electronic parts, etc.

　　Wood mold inhibitor pine mold inhibitor

AfterSalesService :

• Pine board mold inhibitor