Tai'an Wood Processing Factory pine wood square, white pine building wood square

Description :

　　After ACQ treatment, the wood appears green and gradually turns warm brown after outdoor use for a period of time, without affecting painting and coloring. Without reducing the insulation performance and mechanical strength of wood, it can extend the service life of wood by 5-10 times. The main components of wood treated with ACQ-D are not easily detached from the wood, so the wood treated with ACQ-D protection will not cause harm to humans, animals, fish, and plants in the usage environment. This product also has certain flame retardant properties. 1. Technical indicators Implementation standard: SB/T 10432-2007

　　Color: Blue

　　Active ingredient content: 15.0-16.2% (m/m)

　　Main active ingredient ratio DDAC: 29.0-38.0% (m/m)

　　CuO calculation: 62.0-71.0% (m/m)

　　PH value 9-11

　　Density (20 ℃) 1.10-1.25g/cm3

　　The odor has a slight ammonia smell

　　. Viscous and slightly viscous

　　Completely miscible solubility in water

　　2、 Scope of application: ACQ anti-corrosion wood is suitable for various indoor and outdoor environments, both grounded and ungrounded. It is widely used for anti-corrosion treatment of indoor wooden structural beams, columns, wooden floors, wooden keels, wooden wall panels and decorative artificial boards, wooden houses, outdoor furniture, wooden bridges, walkways, fences, wooden bridges, steps, stairs, walkways, docks, swimming pools, wooden poles, wooden sheds, park chairs, ancient building wooden structural components, and various horticultural materials. 3、 Instructions and precautions for use: The usage methods of this product include: vacuum pressurization method, atmospheric pressure soaking method, and spraying method (original solution or appropriate ratio). Using pressurized infiltration as * *. 1. Pressure infusion: The pressure should not be less than 1mp, the time should not be less than 8 hours, and the absorption capacity should be greater than 50kg/cubic meter,

　　ACQ can be prepared into a solution with a concentration of 2-2.5% (1:10-15 to water)

　　2. Soaking treatment: Place the wood in a soaking tank filled with wood preservatives, soak at atmospheric pressure for no less than 48 hours, absorb 100-150kg/cubic meter, and prepare ACQ as a 4% concentration solution (1:6-8 mixed with water),

　　3. Brushing treatment: Three or more coats should be applied. After the * * coat is completely dry, a second coat should be applied without omission. The absorption rate should be greater than 0.5kg/m2. ACQ can be prepared into a 5% concentration solution (1:4-6) and sprayed three times to achieve the desired effect.

　　4. ACQ preservative has a certain degree of toxicity to the skin and eyes. When using this wood preservative, labor protection should be taken, and skin contact with the drug solution is prohibited. If the drug solution accidentally splashes onto the skin, it should be washed with plenty of water, and should not come into contact with wounds. Oral ingestion is also prohibited.

　　5. After homework or contact with this preservative, it should be washed clean with water in a timely manner. Wood treated with ACQ should not be used as food packaging boxes. ACQ wood preservatives should be stored in a cool, ventilated place. The processing waste of wood treated with ACQ can be collected and disposed of like ordinary garbage. Due to the corrosive nature of ACQ wood preservatives on materials such as copper, low-carbon steel, and electroplated zinc, equipment and fasteners that come into contact with these preservatives should avoid using the aforementioned materials. It is recommended to use stainless steel and hot-dip galvanized materials instead

AfterSalesService :

• Wood processing plant