Wholesale of milky white wood mold inhibitor for wood

Description :

　　Anti mold agent for poplar and pine wood,Wood mold inhibitorIt is a new and efficient wood mold inhibitor developed by our company, which has the advantages of high content, acid and alkali resistance, wear and tear resistance, strong permeability, strong adhesion, high humidity resistance, and long mold prevention cycle. Changed the shortcomings of traditional wood mold inhibitors in terms of acid and alkali resistance. This process adopts advanced high and low temperature composite emulsification technology in the world, and uses multiple antibacterial agents to prepare functional compounds, overcoming the resistance of wood to single component antifungal agents.

　　Active anti mold molecules are rapidly adsorbed by wood fibers, and the penetration depth of wood fibers is 20-30 times that of ordinary wood anti mold agents, thereby promoting and improving the effective absorption and anti leakage of wood against fungicides. Through this method, the goal of long-term prevention of mold and blue to wood has been achieved.

　　2、 Product Technical Parameters:

　　1. Appearance: Light yellow liquid. 2. Odor: No special odor. Three. Specific gravity: 1.25.

　　4. 4. Melting point: 260 ℃. 5, pH value: 56. 6 of them. Water solubility: soluble in water, active content: 96%.

　　8. Implementation standard: National standard GB18582-2001.

　　9. Anti corrosion and anti mold effect: 2% concentration in high temperature and humid environment, ensuring no mold for 12 months.

　　10. Safety performance indicators: Acute oral LD 50 (g/kg) in mice; The 4.00 rabbit acute skin irritation test (stock solution) showed slight irritation.

　　3、 Scope of application:

　　1. Widely applicable

　　2. Used for the storage and transportation of fresh logs, boards, and semi-finished products (especially when the container is closed, with no air circulation, high temperature, high humidity, easy to breed bacteria, mold) to prevent changes. Wooden packaging boxes, wooden pallets, equipment packaging boxes, furniture, wooden shelf boards, food packaging boxes.

　　Used for the protection of outdoor wooden houses, wooden floors, outdoor wooden fences, wooden buildings, wooden carvings, and wooden crafts.

　　4. It can be widely used for veneers, particleboard, and plywood (glue can be directly added during the operation, with a dosage of 2% -4%).

　　4、 Usage:

　　1. Adopting traditional immersion, brushing, and vacuum pressurization methods.

　　2. The soaking method shows that the soaking time for 0.5% to 1.5% is 10 minutes, and the soaking time is 20 minutes.

　　3. It is recommended to use a brush coating method with a concentration of 1% -3% and a coating area of 20-25 square meters per kilogram.

　　4. When spraying, please move to an outdoor ventilated area. The spray concentration is 2%~3%, and the spray area is 20~25 m2/kg.

　　According to the "Chinese Code for Acceptance of Construction Quality of Timber Structures" (GB502060-2002), the recommended concentration is 0.3% -0.5%. The retention amount of active and anti mold ingredients in wood should exceed 1.5kg/m3.

　　5、 Packaging specifications: This product is normally packaged in 25kg/drum (PE acid and alkali resistant plastic drum)

　　6、 Attention:

　　1. This medicine has an effect on fish and shellfish and should not be discharged indiscriminately.

　　2. Operators should wear protective equipment such as rubber gloves, goggles, and face shields.

　　3. If accidentally sticking to the skin, wash the eyes with soap and water in a timely manner. If there is severe discomfort, seek medical attention.

　　6. After opening the seal, apply the product once. Unused products should be sealed and stored to avoid affecting their effectiveness.

　　7. Effective usage time: Avoid light and cool down for 24 months.

　　Keywords: Wood mold inhibitor,Wood mold removerPine mold inhibitor, wholesale agent

AfterSalesService :

• Wood mold inhibitor