Chuzhou wood mold inhibitor and wood preservative

Description :

　　Chuzhou, AnhuiWood mold inhibitorMoisture content of wood preservatives: Only when the moisture content of wood exceeds 20%, color changing fungi and other microorganisms can reproduce and grow. Therefore, if the cut wood can be immediately dried to below 20% and the moisture content remains below 20% during processing and use, it can effectively reduce the blue color change. However, due to transportation delays, drying cycles, and other factors, most wood panel companies find it difficult to dry immediately after cutting. Nutrients: The suitable nutritional components for various wood fungi vary, but all fungi can obtain the necessary nutrients from wood. The carbohydrates composed of C (carbon), H (hydrogen), and O (oxygen) in wood, namely starch and monosaccharides, are the main energy required for the growth of blue bacteria. If we can reduce the content of starch and monosaccharides to control the growth of blue bacteria, we can prevent the changes in mold and blue color, which is obviously more difficult for plate making enterprises to achieve.

　　Air: Most fungi must grow in the presence of oxygen. However, they require a small amount of O2. When the O2 content in the air reaches 1%, fungi will grow. Therefore, using oxygen barrier to control the blue color change is even more impractical. Therefore, most domestic timber companies use economical methods to soak newly cut wood in water or continuously spray wood. The second method is simple (oxygen method), but because of its spray density, frequency and other factors, it is often unsatisfactory.

　　Temperature: Wood microorganisms can only grow within a certain temperature range. The temperature for fungal growth is 20-30 degrees Celsius. If two extreme high and low temperature methods are used, the growth rate of fungi will significantly slow down when wood is stored below -15 degrees Celsius or above 40 degrees Celsius. This is not advisable as it involves factors that increase costs. Too many. At present, most anti mold products at home and abroad can achieve ideal results on dry materials with a moisture content of less than 20%, but the treatment effect on wet materials with high moisture content is not good. They are not dry and only need to be cut.

　　Efficient wood demoulding agent is a new generation of highly active demoulding concentrated liquid. The main components of the product are mold differentiation factor, sterilization and antibacterial agent, dispersant impregnating agent, which can remove various bacteria, molds, blueing and fungal algae caused by mold in the product. It is a useful, convenient and economical new mold product.

　　Wood mold removerThe principle is that mold differentiation factors absorb and capture mold through water carriers, pierce mold, penetrate its interior, kill mold, and distinguish mold to make it fall off and disappear. For the stubborn moldy spots in deepening products, semi dew with the same effect can achieve differentiation and inhibit their regeneration. Various bacteria form moldy products, and using semi dew can quickly distinguish the molds together, restoring the raw material properties of the product to a certain extent and leaving no traces of mold. This product is an environmentally friendly export product with simple operation. It can be diluted with tap water and soaked in moldy products.

　　Wood fungicide product features:

　　1. It can be used to eliminate discoloration caused by Trichoderma, Penicillium, Aspergillus, Penicillium graminearum, and other fungi.

　　2. Can be used to eliminate wood discoloration caused by microbial reproduction;

　　III It can be used to eliminate chemical discoloration of wood caused by contact with metal ions such as acid-base enzymes.

　　4. Can be used to eliminate physical discoloration of wood caused by heating or ultraviolet radiation;

　　5. Can be used to eliminate physiological discoloration of wood caused by resin leakage and insect pests;

　　6. It can be used to eliminate harmful phenomena such as thermal discoloration caused by poor drying of wood.

　　Application scope of wood mold remover:

　　Wood mold remover is mainly used for removing molds of walls, bamboo and wood, decorative panels, furniture, wallpaper, leather, synthetic fibers, plastics, rubber, etc.

　　Usage: Spray and soak extensively to treat severe mold growth.

　　For products with delicate mold and mildew spots on the appearance, use a brush or soak to mix and share in a 1:1 ratio. After about 30 minutes, the mold spots will disappear (tap water is acceptable).

　　B. For moldy conditions, surface decay, or mold immersion into the internal product of the product, it is recommended to apply or apply the original solution (brush the original solution 1-2 times)

　　First and foremost:

　　Wood demoulding agents have an oxidizing effect on metals and clothing. Pay attention to protection when using.

　　2. To ensure the effectiveness of use, please use it thoroughly and evenly before use.

　　Shelf life: at room temperature, moisture-proof, sealed, and light resistant. The shelf life is 12 months.

　　Packaging standards: IBC ton drums, 25kg/200kg polyethylene drums.

　　Manufacturer of Wood Anti mold Agent - Praising Anti mold and Winning Honor:

　　As of 2019, the honors won by excellent teams and strong advantages are:

　　18 utility model patent certificates

　　Design Patent Certificate

　　Six trademark registration certificates

　　Certified by ISO 9001:2015 Quality Management System

　　Certified by ISO 14001:2015 Environmental Management System

　　Passed OHSMS 18001:2007 Occupational Health and Safety Management System Certification

　　Keywords of this article: wood degradation agent, wholesale wood degradation agent, wood degradation agent production enterprise, direct sales of wood degradation agent

AfterSalesService :

• Wood mold inhibitor