Wood preservatives and mold inhibitors

Description :

　　Wood mold inhibitorWood preservativesWith the development of modern horticultural technology, people are paying more and more attention to outdoor leisure. Wooden products have also become the primary decoration and leisure items. From floors, display racks, trays, corridors, pavilions, and wooden houses. Most of these wooden products are made of anti-corrosion wood. By incorporating preservatives into solid wood to improve its anti-corrosion properties, it has better functionality. Wood preservative is a special preservative for wood. Widely used in various types of building wood, decorative materials, horticultural wood products, outdoor wooden structural beams, pillars, wooden floors, wooden keels, wooden wall panels, furniture, wooden bridges, shipbuilding, wood harvesting, wooden fences, bamboo products, and other anti mold and anti ant treatments.

　　Simple wood anti-corrosion process

　　Wood preservativesCharacteristics of:

　　1. Good durability and stability

　　Wood preservatives should have more stable chemical properties, be less prone to transpiration, be less likely to be discarded after injection, and maintain their toxicity for a long time.

　　2. Strong penetration ability

　　Wood preservatives need to be easy to penetrate into the interior of wood and have a certain input depth.

　　3. High security

　　Wood preservatives should have high toxicity to various fungi and insects that are harmful to wood, but they should also have low toxicity or non toxicity to humans and animals, and not cause pollution or harm to the environment. With people's increasing emphasis on the environment and sustainability, efficient and environmentally friendly composite wood preservatives have received attention.

　　4. Low corrosiveness

　　Preservatives have low corrosiveness to various metals and are neutral substances that are desirable.

　　5. The harm to wood is minimal.

　　After anti-corrosion treatment, the mechanical strength, excellent texture, and attractive color of wood are not affected by the degree of application.

　　Simple wood anti-corrosion process

　　So how is anti-corrosion wood made? Now, taking the wooden structure in gardens as an example, the editor introduces the construction technology of wood anti-corrosion.

　　Before construction, several test areas were cleared in an inconspicuous location. Sprinkle a few drops of water on the surface of the wood. Assuming that water is quickly absorbed, wood preservatives can be applied to the surface of wood. The use of wood preservatives may vary depending on the age, type, and surface pores of the wood, and the color may also differ. Ensure excellent ventilation in the building area, with temperatures ranging from 10 to 32 degrees Celsius, relative humidity within 85 degrees Celsius, and no rainfall within 24 hours. Don't draw too thin. Mix thoroughly before and during use. Use an artificial brown brush, 1/4 'short hair drum or pump gun.

　　In the case of impregnation, it is recommended to pre treat the wood with impregnation method before initial construction, and then soak the wood in the product for three minutes or longer. All parts of the wood need to be treated.

　　If immersion is not possible, please use a brush, roller or spray gun to apply, roll or spray a layer of anti-corrosion agent. Suggest three times, with an interval of at least one hour.

　　The calculation of monotony and recoating time is based on 21 degrees Celsius and 50% relative humidity. The lower the temperature, the longer the time. After walking for 6-12 hours, stick to monotony for 1 hour. After at least 24 hours, the wood becomes completely monotonous. Leave it for at least 24 hours before painting, priming, topping, or coloring from scratch.

AfterSalesService :

• Wood mold inhibitor and wood preservative