Yangmu board Yangmu board factory

Description :

　　A brief introduction to Yangmu Factory: When it comes to wood processing, many people still have the impression of carpenters or a few broken machines. In fact, after so many years of development, wood processing technology has long become a modern discipline, such as wood science and engineering at North Forestry University, South Forestry University, and Central South Forest. Wood processing technology is also a very important materials discipline in Japan, Europe, and America, with various "cold technologies" emerging one after another. For example, the following five wood processing techniques: wood processing tool CV.

　　In terms of wood processing, many people still have the impression of being a carpenter or a few crushing machines. In fact, after so many years of development, wood processing technology has long been a modern discipline, such as Beilinda, Nanlinda, Zhongnanlin and other wood sciences. Engineering and engineering are both popular professions. Wood processing technology is also a very valuable materials discipline in Japan, Europe, and the United States. Various types of 'black technology' are emerging, such as the following five wood processing techniques:

　　Chemical vapor deposition coating technology for wood processing tools

　　In wood processing, cutting tools are direct tools and good tools. In order to better and more effectively complete various cutting tasks, CVD coating technology for cutting tools, also known as chemical vapor deposition technology, is mainly based on the use of multiple metals (such as nickel, copper, titanium, cobalt, chromium, tantalum, aluminum, etc.). Chemicals or mixtures form a coating or deposition film on the surface of the blade, which improves the efficiency of the tool by enhancing stability, wear resistance, toughness, and even cutting ability.

　　High speed cutting technology for wood

　　The principle of high-speed cutting technology is to improve the use of tools and grinding wheels by increasing the speed per unit time of the machining tool, and shorten the time required to complete product processing and manufacturing. The key factor of high-speed cutting technology is power balance, which is related to production safety. I believe that in the near future, the safety of high-speed cutting tools will become increasingly safe.

　　Nano modified processing technology for wood

　　Nanomodification processing technology is mainly a processing technique that uses nanotechnology to optimize the basic properties of wood raw materials. It combines microwave processing technology with pressure impregnation method to improve the permeability of wood, and then as much precursor solution as possible enters the internal structure of wood protoplasts, with wood as the main raw material. In situ reaction forms nanomaterials, becoming new composite materials.

　　Ultrasonic cutting technology for wood

　　Ultrasonic cutting technology utilizes ultrasonic vibration of the tool end face to process wood through mechanical impact, grinding and throwing of abrasives, as well as ultrasonic cavitation technology. Although ultrasonic cutting technology requires high hardness of wood, it still has good adaptability to the processing of various shapes of wood parts, with high operational accuracy, and can effectively improve production efficiency.

　　Green and environmentally friendly wood processing technology

　　Green and environmentally friendly processing technology is mainly a series of new concept processing technologies that should appear in the requirements of environmental protection, energy conservation, and emission reduction in modern society, such as dust removal, noise reduction technology, and wood processing waste wood recycling technology. .

　　Wood dust removal, noise reduction and vibration technology

　　During the processing of wood, a large amount of sawdust is produced. The main methods are to use efficient cyclone separators to separate and screen sawdust, or to use layered filter dust collectors in the sanding section; The removal technology of noise and vibration is to reduce noise and vibration. By studying the relationship between the resistance of blades in air and airflow. Vibration technology.

　　In addition, both domestically and internationally, modified wood has undergone compression treatment, with hardness and toughness comparable to bulletproof glass. Japan is also researching the use of wood to make wine and other products.

AfterSalesService :

• Yangmu board Yangmu board factory